Commute Time
Date Posted
Title
Job Type
Benefits
Pay
400 Qa Engineer Finance jobs in Ontario,CA
Apply Directly
Applications Engineer
Dover Corporation
Grand Terrace, CA 92313
$85,000-$100,000/yr
Hybrid~ 27 minEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Ability to professionally interact with customers on technical matters
- Strength to lift or carry files weighing up to ten (10) pounds; vision to read printed materials and computer screen, and ability to hear and speech to communicate in person, telephone or over Teams.
- Proficient with Microsoft Outlook, Excel, Word and PowerPoint
- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodation may be made to enable an individual with disabilities to perform the essential functions of this position.
- The work is predominantly sedentary and requires minimal or negligible physical exertion.
- 5+ years of technical product experience without an engineering degree (Product Specialist)
- The environment is primarily in a controlled climate office setting but will also require time on the manufacturing floor. The manufacturing environment is subject to moderate changes in temperature, and the employee may be exposed to typical hazards of noise, flying debris, and overhead hazards requiring the use of proper PPE (Personal Protective Equipment).
- This job description does not constitute a written or implied contract of employment.
- Bachelor's degree in engineering, or equivalent relevant education and work experience.
- Highly organized and efficient in approaching tasks
- Clear, concise, and articulate communication skills - verbal, written and listening
- A self-starter with ability to solve problems and anticipate and avoid issues
- Ability to select a pump and/or accessories based on application requirements
- 2+ years of experience with engineering degree (Applications Engineer)
- The employee is normally seated; however, the nature of the work allows for periods of standing or walking at will.
- Ability to analyze a mechanical system and provide technical guidance for operation and troubleshooting
- This position may require overtime as necessary.
- Strong team player, work ethic and commitment to win
Apply Directly
Quality Assurance Lead
SNAP-ON
Rowland Heights, CA 91748
~ 28 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Mastery of Excel.
- Experience in hand tool, torque, or precision mechanical assembly environments.
- Proficient in Microsoft Office suite products, Word and Outlook.
- High School graduate or equivalent.
- Strong organizational skills, with attention to detail in documentation and recordkeeping.
- ASQ certifications (CQI/CQT) or equivalent technical/metrology training.
- Knowledge of ISO 9001 requirements related to inspection, nonconformance control, and record retention.
- Must be able to comply with Personal Protective Equipment.
- Demonstrated proficiency reading blueprints and applying GD&T; (datums, position, profile, runout, flatness, perpendicularity, etc.).
- Effective English verbal and written communication skills
- Experience running and/or programming CMMs (e.g., PC-DMIS, Calypso, MCOSMOS, or equivalent).
- Experience with MSA / Gage R&R;, SPC basics, and inspection planning (sampling plans, control plans).
- Strong working knowledge of precision measurement tools and methods; comfortable working with tight tolerances.
- Strong collaboration skills in a team environment.
- Well versed with computer data entry skills.
- Must comply with Job Safety Analysis (JSA), and all safety and environmental rules, regulations and practices.
- Working knowledge of calibration and measurement traceability; ability to verify gage condition and suitability.
- Excellent ability to read blueprints.
- Minimum of five (5) years' experience in manufacturing in a quality role.
- Ability to work under pressure and within tight time constraints.
- Ability to use Quality Tools and Methods such as torque measuring and calibration equipment.
- Ability to document inspection results clearly and use computers for data entry (ERP/MES/Excel/Outlook).
Apply Directly
Quality Assurance Specialist
SBM Management
Tustin, CA 92780
$23-$25/hr
~ 42 min OnsiteFlexible ScheduleBilingual Preferred
- Completed all safety and task training certification
- Knowledge of Microsoft Office and computer skills
- Ability to respond to common inquiries or complaints from customers, regulatory agencies, or members of the business community
- Knowledge of cleaning compounds and chemicals, and their safe, efficient use
- Knowledge of cleaning methods and equipment and willing to share with team
- Knowledge of the upkeep and care of the cleaning equipment
- A.A. Degree required with 2+ years of experience, or equivalent combination of education and experience
- May be required to have a valid driver's license
- Ability to read and interpret instructions, procedures, manuals, and other documents
Apply Directly
Manufacturing Engineering Manager
PSG
Grand Terrace, CA 92313
$153,000-$165,000/yr
~ 27 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Familiarization with following software a plus: Access, Automation Direct C-More PLC, Ignition software, SQL Server, Minitab, AutoCAD, MS Visio, MS PowerPoint.
- Highly skilled in PLC programming to support production automation.
- Ability to lead production style Lean Kaizens and PFMEA.
- Understanding of Industry 4.0 concepts and ability to conceptualize a plan to move a manufacturing facility toward a more “Smart Factory”.
- Bachelor of Science in Manufacturing Engineering, Industrial Engineering or Mechanical Engineering.
- Minimum eight (8) years' manufacturing engineering experience working in a production facility (preferably medium to light assembly).
- Three (3) plus years of Engineering Management experience.
- Proven ability to manage, lead and mentor a team of Manufacturing Engineers, Continuous Improvement and Maintenance personnel.
- Proficiency in MS Excel, Word, Solidworks CAD, Ignition Cloud Software.
- Knowledge of continuous improvement tools; raw materials, production processes, quality control, costs, and other techniques for maximizing the effective manufacture and distribution of goods
- Highly skilled in Lean Manufacturing.
- Proven ability in developing budgets that support plant manufacturing and automation growth, including but not limited to planning, budgeting, and executing long term, high cost, manufacturing improvement projects that have favorable rate of return.
New, Posted 19 hours ago
Apply Directly
Production Technician
Anheuser-Busch
Jurupa Valley, CA 92509
$33.83/hr
~ 21 min OnsiteHealth InsuranceRetirement Benefit
- Superior work history, including good attendance
- High School Diploma or GED
- Knowledge of safety policies and procedures
- Proficient in mechanical troubleshooting
- 1-3 years of industrial experience
- Able and willing to work a rotating 12-hour and other alternate work schedule, including day and night shift rotations, and required weekend and holiday hours
- Able and willing to work mandatory overtime as required
Apply Directly
Assembler - Hiring Now
General Micro Systems
Rancho Cucamonga, CA 91739
~ 16 min OnsiteEducation AssistanceHealth InsurancePaid Time Off
- In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
- Post-offer applicants must pass a drug screen test.
- Limited travel required
- If required, you must pass a background check and/or have the ability to obtain and maintain security clearance.
- Must be a US Citizen, Permanent US Resident, or currently authorized to work in the US on a full-time basis without current or future employment sponsorship.
- Minimum High School diploma or general education degree (GED)
- Experienced and familiar with electro-mechanical assembly processes and associated tools/instruments
- Must have experience reading assembly drawings/diagrams and completing work to specifications
- Must be able to work on site the standard 8 AM-5 PM, Monday - Friday schedule and overtime as required
- Minimum of 6 months hands-on assembly experience
- Must report to work at the scheduled time and maintain satisfactory attendance with limited unscheduled absences
- Lift up to 30 lbs.
Apply Directly
Project Engineer
Curtiss-Wright
Brea, CA 92821
Hybrid~ 26 minPaid Time OffRetirement Benefit
- Minimum 2+ years experience in the design and development of mechanical products.
- ERP software experience.
- Bachelor's Degree in Mechanical Engineering or related discipline required.
- This position may require exposure to export-controlled information and subject to additional security screening.
New, Posted 1 day ago
Apply Directly
Owner-Direct National Account Sales Engineer
Upchurch
Ontario, CA
OnsiteHealth InsurancePaid Time Off
- 5+ years of experience in Mechanical, Plumbing, or Electrical sales, retrofits, or related project management.
- Valid driver's license with an insurable driving record.
- Comfortable climbing ladders and lifting up to 50 lbs.
- Travel expectations – Weekly as needed
- Ability to climb ladders and work in rooftop environments with exposure to seasonal temperatures.
- Proficient in Microsoft O ice and CRM tools.
- Strong organizational and communication skills.
- Clear verbal communication and active listening.
- Working knowledge of Mechanical, Plumbing, or Electrical systems.
- Fine motor skills for typing and handling small tools/materials.
- Ability to work independently and manage time effectively.
Apply Directly
Director of Operations
McLane Company
Riverside, CA 92504
$120,000-$130,000/yr
~ 29 min OnsiteUrgently HiringEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Have management experience with large DC and driver workforces (200+).
- Ability to cultivate and manage relationships with customers (100+, comprising 1,000-2,000 stores) and maintain high visibility with major customers, co-ops, and corporate customers.
- Be able to use IT systems to generate and evaluate key performance data.
- Have a detailed understanding of financial statements and resulting cost implications.
- Accounting, planning, and analytical experience is required.
- Be able to identify financial issues and provide cost effective solutions.
- This position requires the ability to read, write, and understand English at a level sufficient to perform job-related tasks effectively and safely. This includes understanding work instructions, safety protocols, and communications essential to the role. The requirement is directly related to the nature of the job and ensures compliance with workplace safety and operational standards.
- Have at least 5 years of experience in all facets of the foodservice distribution Industry, preferably in the QSR sector.
- Candidates may be subject to a background check and drug screen, in accordance with applicable laws.
- 3+ Have a bachelor's degree in Logistics, Business, Accounting, or a related field.
- Have experience with multi-shift, 6- to 7-day operations.
Apply Directly
Manufacturing Engineer
IDEX Corporation
Santa Ana, CA 92725
~ 42 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Use of personal protective equipment (PPE) or safety gear, provided by STC.
- Experience: 7-10+ years manufacturing engineering experience working with process, automation, or specialized manufacturing equipment.
- Experience: 3-7 years manufacturing engineering experience working with process and automation equipment.
- Analyzes simple data sets and prepares basic engineering summaries or reports.
- Experience: 10+ years manufacturing engineering experience with leadership and ownership of major engineering programs.
- Education: Bachelor's degree in engineering or equivalent.
- Performs portions of plans, specifications, and engineering tasks with initial supervision.
- Occasional bending, squatting, reaching, and lifting up to 50 lbs.; some roles require pushing loaded carts.
- Mandatory use of job-specific PPE and machine guards.
- 0-3 years of manufacturing engineering experience or technical internship.
- Familiar with production equipment, shop-floor processes, and manufacturing documentation.
- Assists in developing fixtures, basic tooling, and work instructions.
- Familiar with Control plans and troubleshooting of production equipment.
What companies are hiring Qa Engineer Finance jobs in Ontario,CA?
- Dover Corporation
- SNAP-ON
- SBM Management
- PSG
- Anheuser-Busch
- General Micro Systems
- Curtiss-Wright
- Upchurch
- McLane Company
- IDEX Corporation
- Dover Corporation
- SNAP-ON
- SBM Management
- PSG
- Anheuser-Busch
- General Micro Systems
- Curtiss-Wright
- Upchurch
- McLane Company
- IDEX Corporation
What is the hourly salary range for Qa Engineer Finance jobs in Ontario,CA?
The hourly salary range is $23 - $33.83.
The hourly salary range is $23 - $33.83.
