HomeMy ResumeSaved JobsMatchesFeedback

      264 Meter Reader jobs in Bountiful,UT

      Apply Directly

      Utility Worker

      Summit

      Salt Lake City, UT 84118

      $17/hr
      ~ 19 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

      • Ability to obtain (or current possession of) a DOT Non-CDL Medical Card
      • Basic computer skills
      • Clean criminal background
      • Valid driver's license with a clean Motor Vehicle Record (MVR)
      • Flexible schedule to accommodate fluctuating shifts and coverage needs
      • Note: This position requires travel between multiple locations; reliable personal transportation is essential.
      SmartExplore AI is experimental.
      Apply Directly

      Assembler - Hiring Now

      Moog

      Salt Lake City, UT 84118

      $20-$23/hr
      ~ 19 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

      • Prior experience with circuit cards and strong understanding of ESD
      • 3+ years electro/mechanical assembly experience in a manufacturing environment is required
      • Technical/Vocational training with high emphasis on mechanical systems desired.
      • Position requires attention to detail, organized work practices, and good housekeeping skills to maintain a clean work center
      • Must be able to read and work from assembly drawings, worksheets, parts lists, BOM, test specifications, and other instructions, both written and verbal.
      • HS Diploma or equivalent required
      • Must be proficient in basic computer skills, including MS Office
      SmartExplore AI is experimental.
      Apply Directly

      Assembly C

      L3 Harris

      Salt Lake City, UT 84118

      ~ 19 min OnsiteBilingual Preferred

      • Must use PPE appropriate to the use of chemicals and protection from other hazards
      • Ability to read and interpret work instructions, assembly drawings and shop orders
      • Prior solder experience required in a manufacturing environment
      • Must be able to use basic hand tools and fixturing
      • Must be able to lift at least 32 pounds
      • Must understand general manufacturing and repair processes
      • Requires fully proficient job knowledge/skills.
      • Security clearances may only be granted to U.S. citizens.
      • In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
      • Please be aware many of our positions require the ability to obtain a security clearance.
      • Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 4 years of prior related experience.
      SmartExplore AI is experimental.
      Apply Directly

      General Labor

      Packaging Corporation Of America

      Salt Lake City, UT 84118

      $22.56/hr
      ~ 19 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

      • Be passionate about maintaining a safe work environment
      • Must be authorized to work in the U.S.
      • Must be able to work overtime and weekends as needed
      • Must be willing to work the first and second shift
      • Must have a good attendance record
      • High School Graduate or GED
      SmartExplore AI is experimental.
      Easy Apply

      Airport Rental Car Cleaner

      Managed Labor Solutions

      Salt Lake City, UT 84122

      ~ 19 min OnsiteFlexible ScheduleHealth Insurance

      • Valid driver's license
      • Must be flexible with schedule to work night, weekends and holidays as needed
      • Must be able to reach, stretch, bend and sit for long periods at a time
      • 18 years of age or older
      SmartExplore AI is experimental.
      Apply Directly

      Assembler - Hiring Now

      IDEX Corporation

      West Jordan, UT 84088

      ~ 29 min Onsite

      • High school diploma or equivalent required.
      • Ability to lift and carry up to 50 pounds frequently, write by hand, basic computer skills, and operate simple hand tools used to crimp, cut, strip and measure.
      • Ability to lift/move up to 50 lbs, stand for extended periods, and work safely in a plating room.
      • Read blueprints and follow detailed instructions.
      • Minimum 3 years of production/manufacturing experience
      • Experience using hand tools and measurement devices (crimpers, cutters, calipers, micrometers).
      • Comfortable working hands-on in a chemical handling environment; adherence to PPE and safety protocols required.
      SmartExplore AI is experimental.
      New, Posted 18 hours ago
      Apply Directly

      NDE Quality Inspector- Night Shift

      Precinmac

      Ogden, UT 84403

      ~ 33 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

      • Must be available and willing to travel as the employer determines is necessary or desirable to meet its business needs.
      • Must work in a safe manner obeying all Petersen Inc. safety rules, and ensure the safety and health of himself/herself or others
      • Must maintain regular and acceptable attendance at such level as determined in the employer's sole discretion.
      • Be able to learn new software programs for (data entry/file maintenance),
      • Requires eyesight correctable to within normal range.
      • Have enough experience, past training or education to become certified in weld inspection, or dye penetrant inspection/ magnetic particle inspection, ultrasonic inspection and radiographic testing
      • Be able to be certified as a Dye Penetrant/Mag Particle inspector, Ultrasonic and Radiographic inspection.
      • NDE
      • Requires occasional lifting of up to 50 pounds.
      • Previous experience required.
      • Be able to work overtime, some irregular hours and some weekends as schedule dictates.
      • Must maintain regular and acceptable attendance at such level as is determined in the employer's sole discretion.
      • Thorough understanding of geometric dimensioning and tolerancing (GD & T) in accordance with ANSI Y14.5
      • Must be proficient in Microsoft word, Excel, Outlook.
      • Requires working in a shop environment- hot in the summer cool in the winter, noisy, and dusty.
      • Requires manual dexterity and eye-hand coordination to properly use inspection tools.
      • Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all of the employer's safety policies and rules and must be willing to report safety violations and potential safety violations to appropriate supervisory or management personnel.
      • Requires prolonged standing, bending, stooping, and stretching.
      • Requires mobility to access difficult inspection access areas.
      SmartExplore AI is experimental.
      Apply Directly

      Electro/Mechanical Assembler

      Thales

      Salt Lake City, UT 84111

      ~ 19 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

      • OHM meter
      • Performs assignments of an especially complex nature or gives technical guidance with limited or no supervision.
      • High school diploma or GED, with technical or vocational education in electronics and communications or previous experience, typically acquired with a minimum of 5 (five) years of experience assembling diversely complex electrical/mechanical components, sub-assemblies and assemblies in the requested subject of expertise.
      • Solder pots
      • Good with numbers, detail oriented and relevant organizational skills.
      • Torque tools
      • Small tools (all kinds)
      • Rivet machine
      • Applicants must be legally authorized to work in the United States for any employer at the time of hire.
      • Must be a U.S. Person as defined in applicable law, or otherwise authorized or eligible for authorization, to access to hardware, software, technology or technical data controlled under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR).
      • Pliers
      • Sockets
      • Must be able to read and understand schematics and assembling instructions.
      • Wrenches
      • Drills stencils
      • Possess talents, ability and/or desire to learn, work in and support a structured team atmosphere.
      • Must be a US Person as defined in applicable law.
      • Wire stripper
      • Screwdrivers
      • Oven
      • Ability to operate/use wire cutters
      • Good verbal and written communication skills.
      • Soldering iron
      • Ability to pass the IPC and or J STD certification course.
      • Qualified candidates with [a] criminal history will be considered and are not automatically disqualified, consistent with federal law, state law, and local ordinances.
      • Silkscreen
      • Self-motivated, critical thinker with technical background.
      • This position is not eligible for visa sponsorship or for assuming sponsorship of an employment visa now or in the future.
      • Total Target Cash (TTC) 54,776.00 - 88,803.13 USD Annual
      • Crimpers
      • This position will require successfully completing a post-offer background check.
      SmartExplore AI is experimental.
      Apply Directly

      Assembler - Hiring Now

      Barnes Group

      Ogden, UT 84403

      ~ 33 min Onsite

      • Compliance with general attendance standards is required.
      • Willingness and ability to learn and retain new skills.
      • High school diploma or GED
      • Ability to work in teams of two or three to accomplish manufacturing goals.
      • Capable of reading and understanding written instructions, procedures, and safety rules.
      • This position may include access to controlled information or technology covered under applicable U.S. export control laws. As such, employment for this job position may be contingent on either verification that an applicant falls under the definition of a "U.S. Person" (which includes U.S. citizens, U.S. nationals, U.S. lawful permanent residents, and those granted U.S. asylum or refugee status) or Barnes timely obtaining any necessary export license required under federal laws. The employer evaluates such export license situations on a case-by-case basis and may decline to proceed with a job applicant in its sole discretion.
      SmartExplore AI is experimental.
      Apply Directly

      M1 Armor Crewman

      US ARMY

      Salt Lake City, UT 84118

      ~ 19 min OnsiteUrgently Hiring

      • Tener diploma de High School o GED
      • Cumplir con las reglas sobre los tatuajes
      • Ser ciudadano estadounidense o residente permanente con una Green Card válida
      • No tener complicaciones médicas
      • Tener entre 17 y 34 años de edad
      • No tener infracciones legales graves
      SmartExplore AI is experimental.

      What companies are hiring Meter Reader jobs in Bountiful,UT?

      1. Summit
      2. Moog
      3. L3 Harris
      4. Packaging Corporation Of America
      5. Managed Labor Solutions
      6. IDEX Corporation
      7. Precinmac
      8. Thales
      9. Barnes Group
      10. US ARMY

      What is the hourly salary range for Meter Reader jobs in Bountiful,UT?

      The hourly salary range is $17 - $23.

      Recent Searches

        Browse Jobs in Top Cities

        Browse Jobs by State

        Browse Jobs by Title

        Post a Job

        About

        Advice

        Contact

        © 2026 Jobs2Careers. All rights reserved.

        Privacy Policy

        Terms of Use

        Your Privacy ChoicesCalifornia Consumer Privacy Act (CCPA) Opt-Out Icon

        Logos provided by Logo.dev

        Jobs2Careers Powered by Talroo