Home My Resume Saved Jobs Matches Feedback

327 Master Scheduler jobs in Henefer,UT

Apply Directly

Assembler - Hiring Now

Moog

Salt Lake City, UT 84118

$20-$23/hr

~ 45 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Prior experience with circuit cards and strong understanding of ESD
3+ years electro/mechanical assembly experience in a manufacturing environment is required
Technical/Vocational training with high emphasis on mechanical systems desired.
Position requires attention to detail, organized work practices, and good housekeeping skills to maintain a clean work center
Must be able to read and work from assembly drawings, worksheets, parts lists, BOM, test specifications, and other instructions, both written and verbal.
HS Diploma or equivalent required
Must be proficient in basic computer skills, including MS Office

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

Graco

Kamas, UT 84036

~ 38 min OnsiteEducation AssistanceHealth InsuranceRetirement Benefit

Strong problem solving and troubleshooting skills
Handle and manipulate complex tooling & equipment
Wear safety glasses
Ability to lift up to 45 pounds or greater
Ability to bend
Knowledge of NEC electrical standards.
Ability to stoop
Knowledge of how-to layout set up, perform standard operations, and perform unique operations where quality, tolerances, and sequences are specified.
Applicants must be legally authorized to work in the United States.
Strong mechanical aptitude
Good hand/eye coordination
Frequent repetitive elbow movement and simple grasping with both hands
Ability to push/pull
This role is not eligible for immigration sponsorship now or in the future (e.g., H-1B, TN, F-1 OPT).
High School diploma or GED
Basic mechanical, electrical, and pneumatic skills.
Good communication skills and work well with others
Ability to read and follow work instructions and manufacturing procedure numbers.
Continuous standing during the course of an 8-hour day
Ability to work on a team and follow/execute a plan
Requires a minimum of 2.5 years of White Knight Assembly A experience, or equal relevant experience, to gain the flexibility to perform efficiently on all assembly lines, including some testing.
Ability to efficiently perform basic assembly and operations from detailed instruction.

SmartExplore AI is experimental.

New, Posted 19 hours ago

Apply Directly

Route Service Representative - UniFirst

UniFirst

Bountiful, UT 84011

Requires TravelEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Capable of lifting, carrying, and pushing up to 50 lbs., with the ability to remain on your feet for extended periods.
Must be at least 21 years old
With a valid driver's license
A clean driving record
DOT Compliance: Meet all Department of Transportation (DOT) requirements, including a physical exam.
Reliable transportation
High school diploma, GED, or military service required.

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

Barnes Group

Ogden, UT 84403

~ 39 min Onsite

Compliance with general attendance standards is required.
Willingness and ability to learn and retain new skills.
High school diploma or GED
Ability to work in teams of two or three to accomplish manufacturing goals.
Capable of reading and understanding written instructions, procedures, and safety rules.
This position may include access to controlled information or technology covered under applicable U.S. export control laws. As such, employment for this job position may be contingent on either verification that an applicant falls under the definition of a "U.S. Person" (which includes U.S. citizens, U.S. nationals, U.S. lawful permanent residents, and those granted U.S. asylum or refugee status) or Barnes timely obtaining any necessary export license required under federal laws. The employer evaluates such export license situations on a case-by-case basis and may decline to proceed with a job applicant in its sole discretion.

SmartExplore AI is experimental.

Apply Directly

Quality Inspector (NDT Technician)

Precinmac

Ogden, UT 84403

~ 39 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Must work in a safe manner obeying all Petersen Inc. safety rules, and ensure the safety and health of himself/herself or others
Must be available and willing to travel as the employer determines is necessary or desirable to meet its business needs.
Must maintain regular and acceptable attendance at such level as determined in the employer's sole discretion.
Requires eyesight correctable to within normal range.
Be able to learn new software programs for (data entry/file maintenance),
Have enough experience, past training or education to become certified in weld inspection, or dye penetrant inspection/ magnetic particle inspection, ultrasonic inspection and radiographic testing
Be able to be certified as a Dye Penetrant/Mag Particle inspector, Ultrasonic and Radiographic inspection.
Requires occasional lifting of up to 50 pounds.
Previous experience required.
Be able to work overtime, some irregular hours and some weekends as schedule dictates.
Must maintain regular and acceptable attendance at such level as is determined in the employer's sole discretion.
Must be proficient in Microsoft word, Excel, Outlook.
Requires working in a shop environment- hot in the summer cool in the winter, noisy, and dusty.
Thorough understanding of geometric dimensioning and tolerancing (GD & T) in accordance with ANSI Y14.5.
Familiarity with basic inspection tools.
Requires manual dexterity and eye-hand coordination to properly use inspection tools.
Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all of the employer's safety policies and rules and must be willing to report safety violations and potential safety violations to appropriate supervisory or management personnel.
Requires prolonged standing, bending, stooping, and stretching.
Requires mobility to access difficult inspection access areas.

SmartExplore AI is experimental.

Apply Directly

Quality Control Technician

HEXCEL CORPORATION

Salt Lake City, UT 84118

~ 45 min Onsite

High school diploma or general education degree (GED) required
Ability to conduct and understand basic arithmetic and measurements using a calculator and ruler
Basic computer skills
Ability to urgently address situations and events that require a quick response
Ability to physically perform the functions of the job
Eligible candidates must be a: U.S. citizen, U.S. national, person lawfully admitted for permanent residence, temporary resident under sections 210(a) or 245(A) of the Immigration and Nationality Act, person admitted in refugee status, or person granted asylum
Willingness to work overtime as needed

SmartExplore AI is experimental.

Apply Directly

Assembly C

L3 Harris

Salt Lake City, UT 84118

~ 45 min OnsiteBilingual Preferred

Must use PPE appropriate to the use of chemicals and protection from other hazards
Ability to read and interpret work instructions, assembly drawings and shop orders
Prior solder experience required in a manufacturing environment
Must be able to use basic hand tools and fixturing
Must be able to lift at least 32 pounds
Must understand general manufacturing and repair processes
Requires fully proficient job knowledge/skills.
Security clearances may only be granted to U.S. citizens.
In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
Please be aware many of our positions require the ability to obtain a security clearance.
Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimum of 4 years of prior related experience.

SmartExplore AI is experimental.

Apply Directly

Quality Inspector I-III, 2nd Shift 4PM-2:30AM

Nammo Defense Systems

Salt Lake City, UT 84118

~ 45 min Onsite

Can identify and accurately write up non-conformance reports with the QE guidance, when needed
Proficient in Excel, Word, SmarTeam, Epicor, and Outlook per job requirements
Capable of utilizing Excel, Word, SmarTeam, Epicor, and Outlook per job requirements
Basic understanding of Geometric Dimensioning and Tolerancing (GD&T;)
Able to train other Quality Technicians on a small number of skills and inspection plans
Can perform program specific inspection plans with no supervision
Can fill in for various programs at a Tech III level
Can identify and accurately write up non-conformance reports
Can perform program specific inspection plans with minimal supervision after training
Calipers, height gauges, OD/ID mics, Vernier scale, Romer Arm Usage, Optical Comparators, Pi Tapes
Able to train other Quality Technicians on a wide array of skills and inspection plans
High School Diploma or GED required
Can utilize the following items without supervision, and perform trouble shooting tasks
5+ years' relevant experience
Can perform program specific inspection plans with no supervision, and do basic troubleshooting tasks, when needed, for issues that arise
Basic understanding of dimensioning
In depth understanding of Geometric Dimensioning and Tolerancing (GD&T;)
Can utilize the following items without supervision, but may require assistance in troubleshooting: Calipers, height gauges, OD/ID mics, Vernier scale, Romer Arm Usage, Optical Comparators, Pi Tapes
10+ years' relevant experience