Home My Resume Saved Jobs Matches Feedback

190 Machine Operator jobs in Coronado,CA

Apply Directly

Assembler - Hiring Now

L3 Harris

San Diego, CA 92101

$22.83-$42.54/hr

~ 19 min OnsiteBilingual PreferredEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Able to lift minimum of 35 lbs.
Able to work under Microscope.
Ability to read assembly drawings, BOM, wire list, engineering change orders, rework instructions, and process control instructions
Ability to obtain a US Security Clearance
Basic hand soldering of SMT, through-hole, and wiring.
Security clearances may only be granted to U.S. citizens.
Mechanical assembly using crimping tool, hot plate and torque drivers.
Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimium of 2 years of prior related experience.
Able to work on ladder, crane and scaffolding.

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

Solar Turbines Incorporated

San Diego, CA 92101

~ 19 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Willing to work any shift
Any offer of employment is conditioned upon the successful completion of a drug screen
High school diploma, GED, or equivalent

SmartExplore AI is experimental.

Apply Directly

Tool Room Attendant

VTG

San Diego, CA 92101

$21.98/hr

~ 19 min Onsite

This position requires skills such as walking, running, climbing, crawling, jumping and other similar physical activities. The worker must be able to endure extreme climate conditions and be able to work in an outdoor setting

SmartExplore AI is experimental.

New, Posted 1 day ago

Apply Directly

Assembler - Hiring Now

General Atomics

Poway, CA 92064

~ 35 min Onsite

Good understanding of the general aspects of the job with limited technical comprehension.
Familiarity with use of soldering and compression connection tools.
Good visual perception and ability to distinguish between colors.
Typical requires a high school diploma or equivalent and three or more years experience.
Must be customer focused and possess:
Knowledge of computer operations and applications pertinent to the position.
The ability to work independently or in a team environment is essential as is the ability to work extended hours as required.
Proficient in the use of hand tools and torque wrenches; must have a solid understanding of prevailing torque and its proper application.
The ability to read and interpret engineering drawing and wire lists.

SmartExplore AI is experimental.

Apply Directly

Inside Machinist - 25917

HII

San Diego, CA 92101

~ 19 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Must be able to complete OHSA 10 course, low speed vehicle training (for operation of carts), and completion of PQS 301 Craftsman qualification within ninety (90) days.
Security Clearance: Ability to Obtain
May require forklift license depending on shop need - will require forklift physical.
Start date contingent upon approval of base access which is required for this position and continued employment.
Must provide own hand tools as designated per trades specialty.
High School education, or Trade School or equivalent, and 4 years of related experience.
Must be able to maintain current training and qualifications per equipment manufacturer's technical requirements and software updates.
Must be able to obtain and maintain CAC ID Base access and DoD Security Clearance.

SmartExplore AI is experimental.

Apply Directly

Manufacturing Technician - Hiring Now

Integrated Polymer Solutions

San Diego, CA 92121

~ 19 min OnsiteHealth InsuranceRetirement Benefit

Years' Experience: Three to six months' related experience and/or training
Must be able to read job specifications and procedures to determine any machine adjustments and the material requirements.
Able to communicate well with supervisor and follow work instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
Must be able to accurately work with scales.
Must have ability to safely work with cutting knifes and steel rule dies.
Ability to compute rate, ratio, and percent and to read and interpret metal rules.
Education: High School diploma or general education degree (GED) or equivalent combination of education and experience
Must be familiar with basic machine functions in order to perform the tasks stated above.
This position requires access to information subject to the International Traffic in Arms Regulations (ITAR).
Employment is contingent upon the applicant being a "U.S. person" as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

SmartExplore AI is experimental.

Apply Directly

Equipment Set Up - $20/hour

gategroup

San Diego, CA 92101

$20/hr

~ 19 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Will be exposed to extreme temperature changes and noise
Must be able to lift, push, pull, and move product, equipment and supplies up to fifty (50) pounds frequently during shift
Communicate effectively with supervisors and co-workers
Completes paperwork and related administrative duties
High School Diploma or GED preferred
Must be able to read and write to complete required forms
Arrives to work on-time
Works assigned schedule which may vary and could include weekends and holidays
Works overtime when required
Regularly stands, bends, lifts, and moves intermittently during shifts of 8+ hours

SmartExplore AI is experimental.

Apply Directly

Electronics Assembler

MyHR, LLC.

San Diego, CA 92111

~ 19 min Onsite

Skilled in the use of hand tools such as pliers, cutters, and soldering equipment.
Interpret and follow work orders, drawings, schematics, and written or verbal instructions to complete assigned assemblies.
Able to follow written and verbal instructions and perform accurate measurements.
PCB soldering.
Perform a variety of assembly tasks including wire cutting, crimping, labeling, soldering, potting, heat shrink application, IDC and SCSI connector work, harness board setup, box builds, kitting, continuity testing, and pin extraction.
Assist with quality management system (QMS) initiatives and contribute to continuous improvement efforts.
Detail-oriented with the ability to read and interpret technical drawings and blueprints.
Must be able to accurately identify color codes.
Working knowledge of IPC-610/620 standards
Strong hand-eye coordination; ability to perform fine assembly work under magnification.

SmartExplore AI is experimental.

New, Posted 18 hours ago

Apply Directly

Assembler - Hiring Now

Ametek

San Diego, CA 92121

~ 19 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Must require a minimum of 3 - 5 years of related experience.
Must be able to use hand tools (i.e. torque wrench, drills and inspection tools).
Must be able to communicate effectively with others.
Due to the nature of Programmable Power programs and products, applicants must have the legal right to work in the U.S. and additionally must be legally authorized to access export-controlled information and source code.
This position requires the ability to lift 25 pounds.
Must possess good to excellent assembly blueprint reading experience/skills.
Basic computer skills.
High school diploma or equivalent
Ability to properly read a variety of measuring devices including rulers, tape measures, and scales.

SmartExplore AI is experimental.

Apply Directly