Home My Resume Saved Jobs Matches Feedback

118 Machine Operator jobs in Chula Vista,CA

Apply Directly

Assembler - Hiring Now

L3 Harris

San Diego, CA 92101

$22.83-$42.54/hr

~ 20 min OnsiteBilingual PreferredEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Able to lift minimum of 35 lbs.
Able to work under Microscope.
Ability to read assembly drawings, BOM, wire list, engineering change orders, rework instructions, and process control instructions
Ability to obtain a US Security Clearance
Basic hand soldering of SMT, through-hole, and wiring.
Security clearances may only be granted to U.S. citizens.
Mechanical assembly using crimping tool, hot plate and torque drivers.
Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimium of 2 years of prior related experience.
Able to work on ladder, crane and scaffolding.

SmartExplore AI is experimental.

Apply Directly

Manufacturing Technician - Hiring Now

Integrated Polymer Solutions

San Diego, CA 92121

~ 20 min OnsiteHealth InsuranceRetirement Benefit

Years' Experience: Three to six months' related experience and/or training
Must be able to read job specifications and procedures to determine any machine adjustments and the material requirements.
Able to communicate well with supervisor and follow work instructions.
Ability to deal with problems involving a few concrete variables in standardized situations.
Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
Must be able to accurately work with scales.
Must have ability to safely work with cutting knifes and steel rule dies.
Ability to compute rate, ratio, and percent and to read and interpret metal rules.
Education: High School diploma or general education degree (GED) or equivalent combination of education and experience
Must be familiar with basic machine functions in order to perform the tasks stated above.
This position requires access to information subject to the International Traffic in Arms Regulations (ITAR).
Employment is contingent upon the applicant being a "U.S. person" as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.
Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

Solar Turbines Incorporated

San Diego, CA 92101

~ 20 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Willing to work any shift
Any offer of employment is conditioned upon the successful completion of a drug screen
High school diploma, GED, or equivalent

SmartExplore AI is experimental.

New, Posted 1 hour ago

Apply Directly

Assembler - Hiring Now

Ametek

San Diego, CA 92121

~ 20 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Due to the nature of Programmable Power programs and products, applicants must have the legal right to work in the U.S.
Must be able to use hand tools (i.e. torque wrench, drills and inspection tools).
Specific vision abilities required by this job include close vision, distance vision, color vision, peripheral vision, depth perception and ability to adjust focus.
This position requires the ability to lift 25 pounds.
Must possess good to excellent assembly blueprint reading experience/skills.
High school diploma or equivalent
Ability to properly read a variety of measuring devices including rulers, tape measures, and scales.
Must require a minimum of 3 - 5 years of related experience.
Must be able to communicate effectively with others.
And additionally must be legally authorized to access export-controlled information and source code.
Assembler levels 1 - 5 will vary based on years of experience and scope of responsibility.
Basic computer skills.

SmartExplore AI is experimental.

New, Posted 1 hour ago

Apply Directly

Assembler - Manufacturing

General Atomics

Poway, CA 92064

~ 36 min Onsite

Good understanding of the general aspects of the job with limited technical comprehension.
Familiarity with use of soldering and compression connection tools.
Good visual perception and ability to distinguish between colors.
Typical requires a high school diploma or equivalent
Ability to obtain and maintain DoD Security Clearance is required.
Must be customer focused and possess:
Knowledge of computer operations and applications pertinent to the position.
The ability to work independently or in a team environment is essential as is the ability to work extended hours as required.
Three or more years experience
The ability to read and interpret engineering drawing and wire lists.

SmartExplore AI is experimental.

New, Posted 7 hours ago

Apply Directly

Shipfitter - Navy

BAE Systems

San Diego, CA 92113

~ 20 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Able to measure using a scale and tape measure
Able to physically perform essential job duties with or without accommodations
High School Diploma or GED
Able to apply common sense understanding to carry out instructions in written, oral or diagram form
Read, understand, and interpret advanced blueprints to preform task required
Able to wear appropriate protective gear and use basic shipfitting tools
Able to read, write and comprehend simple instructions
Able to work at heights, in confined spaces and have the ability to climb staircases and ladders of varying sizes
Able to calculate and understand units of measure, including fractions and decimals
3 Years of expirience required

SmartExplore AI is experimental.

Apply Directly

Electronics Assembler

MyHR, LLC.

San Diego, CA 92111

~ 20 min Onsite

Skilled in the use of hand tools such as pliers, cutters, and soldering equipment.
Interpret and follow work orders, drawings, schematics, and written or verbal instructions to complete assigned assemblies.
Able to follow written and verbal instructions and perform accurate measurements.
PCB soldering.
Perform a variety of assembly tasks including wire cutting, crimping, labeling, soldering, potting, heat shrink application, IDC and SCSI connector work, harness board setup, box builds, kitting, continuity testing, and pin extraction.
Assist with quality management system (QMS) initiatives and contribute to continuous improvement efforts.
Detail-oriented with the ability to read and interpret technical drawings and blueprints.
Must be able to accurately identify color codes.
Working knowledge of IPC-610/620 standards
Strong hand-eye coordination; ability to perform fine assembly work under magnification.

SmartExplore AI is experimental.

Apply Directly

Inside Machinist - 25917

HII

San Diego, CA 92101

~ 20 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Must be able to complete OHSA 10 course, low speed vehicle training (for operation of carts), and completion of PQS 301 Craftsman qualification within ninety (90) days.
Security Clearance: Ability to Obtain
May require forklift license depending on shop need - will require forklift physical.
Start date contingent upon approval of base access which is required for this position and continued employment.
Must provide own hand tools as designated per trades specialty.
High School education, or Trade School or equivalent, and 4 years of related experience.
Must be able to maintain current training and qualifications per equipment manufacturer's technical requirements and software updates.
Must be able to obtain and maintain CAC ID Base access and DoD Security Clearance.

SmartExplore AI is experimental.

Apply Directly

3D Print Technician

Keysight Technologies

Chula Vista, CA

Onsite

Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
Mechanical aptitude and strong attention to detail
High school diploma or equivalent
Experience with Corel Draw design software.
Experience with 3D printing technologies and materials
Visa Sponsorship is not available for this position.
3D Print Technician
Manual dexterity for handling small parts and tools
Ability to lift up to 40 lbs.
Familiarity with slicing software (e.g. Bambu Labs)
Ability to troubleshoot technical issues
Essentials: Experience with Bambu H2D, H2C and H2S printers.

SmartExplore AI is experimental.

New, Posted 12 hours ago

Apply Directly