Home My Resume Saved Jobs Matches Feedback

86 Machine Operator jobs in Bloomington,CA

New, Posted 6 hours ago

Apply Directly

Assembler - Hiring Now

Collins Aerospace

Riverside, CA 92506

$22.28-$49.49/hr

~ 19 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Typically, a HS Diploma or GED is required.
This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here.

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

General Micro Systems

Rancho Cucamonga, CA 91739

~ 22 min OnsiteEducation AssistanceHealth InsurancePaid Time Off

In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
Post-offer applicants must pass a drug screen test.
Limited travel required
If required, you must pass a background check and/or have the ability to obtain and maintain security clearance.
Must be a US Citizen, Permanent US Resident, or currently authorized to work in the US on a full-time basis without current or future employment sponsorship.
Minimum High School diploma or general education degree (GED)
Experienced and familiar with electro-mechanical assembly processes and associated tools/instruments
Must have experience reading assembly drawings/diagrams and completing work to specifications
Must be able to work on site the standard 8 AM-5 PM, Monday - Friday schedule and overtime as required
Minimum of 6 months hands-on assembly experience
Must report to work at the scheduled time and maintain satisfactory attendance with limited unscheduled absences
Lift up to 30 lbs.

SmartExplore AI is experimental.

New, Posted 6 hours ago

Apply Directly

Assembler - Hiring Now

RTX

Riverside, CA 92506

$22.28-$49.49/hr

~ 19 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Typically, a HS Diploma or GED is required.
This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here.

SmartExplore AI is experimental.

New, Posted 6 hours ago

Apply Directly

Production Worker

Mauser Packaging Solutions

San Bernardino, CA 92404

~ 13 min OnsiteHealth InsurancePaid Time Off

Ability to lift up to 35lbs
Troubleshoot problems and report issues
Must work well in team environment
Ability to work in a fast paced environment
High School diploma or equivalent
Ability to stoop, kneel, bend and climb
Must be able to understand verbal and written instructions
Understand plant safety guidelines and pass all required safety training
Ability to be on feet up to 8-12 hours per shift
Experience working in a Manufacturing Environment
Use of hands and fingers to perform job function

SmartExplore AI is experimental.

New, Posted 7 hours ago

Apply Directly

Quality Technician

Stremicks Heritage Foods

Riverside, CA 92505

$27.50-$33.14/hr

~ 19 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Quality Technician
Must be able to commute to Riverside, CA 92505
Weekends as needed
HACCP guidelines
FDA regulations
In person work location
Coordinate measuring machines (CMM)
Holidays
Overtime
Micrometers
Night and/or swing shift
Pay: $27.50 - $33.14 per hour
Manufacturing: 1 year (Preferred)

SmartExplore AI is experimental.

Apply Directly

Operational Support - Laborer

Packaging Corporation Of America

San Bernardino, CA 92404

~ 13 min Onsite

May be required to stack parts up to 30 lbs. for a period of up to 12 hours
Must be willing to work closely on a day-to-day basis with other production personnel
Must be able to maintain shop and shop equipment per 5S Standards
Must be able to pass company safety rules and lock-out tag-out procedures
Must be able to work overtime and weekends as needed
High School Graduate or GED

SmartExplore AI is experimental.

Apply Directly

Paid on the Job Training - Auto Glass Technician Trainee

Safelite

Redlands, CA 92373

$18.25/hr

~ 16 min Onsite

Ability to communicate orally (via phone) and written (via computer or other electronic means)
Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via camera / video surveillance
Valid state-issued driver's license and any other licenses (as required by federal, state and local laws) to operate a company vehicle. Required
Lifting and carrying up to 25 lbs. for short periods, assist an associate with lifting windshields weighing 26 lbs. to 50 lbs.
Must be 18 years of age or older.
Ability to stand for extended periods, work in tight spaces, bend and twist body
On-the-job training/completion of Safelite SafeTech™ certification. Required
Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”
Ability to maintain a professional appearance, adhering to Company uniform and PPE policies
Ability to use a variety of hand tools and power tools safely and effectively
Ability to read, write and interpret the English language and technical directions
Ability to safely work outside (in a variety of weather conditions and extreme temperatures) for extended periods

SmartExplore AI is experimental.

New, Posted 4 hours ago

Apply Directly

Assembler - Hiring Now

Vishay Intertechnology

Ontario, CA 91764

$18-$20/hr

~ 18 min Onsite

This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as "U.S. Persons" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.
Be able to perform the basic process operations in the manufacturing of potentiometers in the assigned work centers while meeting labor standards
Demonstrate knowledge, aptitude and manual coordination
Ability to read, interpret and follow engineering drawings and specifications
Utilize inspection gauges, tools and electronic test equipment
High School diploma or equivalent
Be able to work under a microscope

SmartExplore AI is experimental.

Apply Directly

CNC Mill Operator 1

Illinois Tool Works

Corona, CA 92878

~ 26 min Onsite

Safety Glasses must be worn at all times.
Trained in the nonconforming material procedure
Knowledge of different materials
Blueprint reading
Basic math skills
The employee must frequently lift and/or move up to 10 pounds and occasionally lift and/or move up to 75 pounds.
Knowledge of routing
The noise level in the work environment is usually low to moderate.
The description of the physical demands and the work environment characteristics here represent those that must be met by an employee to successfully perform and those an employee encounters while performing the essential functions of this position. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
The employee frequently is required to sit.
Knowledge of inspection skills
The employee is occasionally required to stand; walk; use hands to finger, handle, or feel; reach with hands and arms; and stoop or crouch.
Specific vision abilities required by this job include close vision, color vision, and ability to adjust focus.
While performing the duties of this job, the employee is regularly required to talk or hear.
Required cutting tool knowledge
Must be familiar with the basic machine functions in order to perform the tasks stated above.
Knowledge of different CNC controls