Commute Time
Date Posted
Title
Job Type
Benefits
Pay
339 Fabrication Engineering jobs in Phoenix,AZ
Apply Directly
FT Welder Fabricator
Precision Metal Products
Phoenix, AZ 85034
$17-$22/hr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Experience 3yrs of TIG and MIG welding of steel, aluminum, and stainless sheet metal components
- Weld components according to sketches, drawings and/or blueprints specifications
- Experience in sheet metal fabrication
- High School Diploma or GED
- Experience reading and interpreting blueprints
- Versatility needed to help in other fabrication processes as need it
- Setup and run other fabrication equipment such as press brakes, grinder, band saw, drill press, etc.
- Good problem-solving skills
- Experience operating a forklift
- Optimize welding processes for production runs
- Must be able to pass AWS D1.1 or D1.2 Weld Test
- Strong Math Skills
Apply Directly
2nd Shift Manufacturing Engineer
Precision Aerospace
Phoenix, AZ 85009
$80,000-$130,000/yr
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Frequent sitting, standing, walking, talking, hearing, seeing, writing and typing
- Occasional reaching, climbing, balancing, stooping, kneeling, crouching, pushing, pulling, fingering, grasping, feeling, twisting, bending and repetitive motion
- Expert ability to read and interpret aerospace drawings, specifications, and customer requirements, including contracts
- Work onsite, in the office, sitting for up to 8 hours at a time.
- Utilization of Microsoft Office applications including Teams and other
- 3 to 5 years' experience with sheet metal fabrications and welding required
- Occasional lifting of up to 40 pounds
- Due to ITAR regulations, this position requires that the employee be a US Person (US Citizen or Permanent Resident)
- Ability to clearly and effectively present complex information to all levels of employees, management, and clients.
- The ability to wear proper personal protective equipment, including earplugs, safety glasses, safety shoes, etc.
Apply Directly
Assembler - Hiring Now
Federal Signal
Tempe, AZ 85281
$24-$33/hr
~ 23 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Must be able to bend, stretch, kneel, and squat to perform repairs and inspections.
- High School diploma or GED or Equivalent experience.
- Must be comfortable with electrical trouble shooting.
- Ability to read a tape measure and calculate differences in measurements.
- Ability to learn and work in a team environment.
- Must be able to lift 50 pounds at times.
- Must have wrenching experience.
- Must be eager to learn, have a good work ethic, and be able to accept responsibility for work performed.
- Minimum of 1+ years of experience in a mechanical field with hydraulic system repairs including pump valves, cylinders, etc.
- Ability to read blueprints or schematics.
- Must be comfortable using power tools, pneumatic wrenches, grinder, air tools etc.
- Ability to read service and repair manuals.
Apply Directly
Assembler - Hiring Now
Mercury Systems
Phoenix, AZ 85034
OnsiteFlexible ScheduleEducation Assistance
- Constantly move objects and use abdominal and lower back muscles to provide support over time without fatigue. Specific abilities required by the job include positioning oneself to lift or move objects weighing up to 40lbs.
- Must have meticulous hand-eye coordination and manual dexterity
- Constant movement and use of limbs. Specific abilities required by this job include prolonged standing, walking, bending, kneeling, stooping, crouching, crawling, climbing and frequently pinching and/or gripping. Sometimes, working under a microscope for long periods of time will be required
- Requires good manual dexterity and coordination, and stamina. Specific abilities required by this job include the frequent requirement of overtime work.
- Must be detail oriented and able to multitask
- Frequently observe, detect, discern, and convey information. Specific abilities required by this job include near, far and color vision acuity, peripheral vision, depth perception and ability to adjust focus.
- Must be able to travel to Chantilly VA for up to 2 months for training
- Excellent interpersonal and communication skills both oral and written
- High School Diploma or GED
- Must be able to work a flexible schedule in order to meet production and customer needs
- Knowledge of ESD (Electrostatic discharge) procedures
- Targeted start date: beginning to mid-January 2026
- Minimum of 5 or more years of mechanical assembly experience
- This position requires you to access information that is subject to U.S. export regulations. You may only access such information if you are a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8 U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. government.
Apply Directly
Production Technician
Praxair, Inc - a Linde Company
Phoenix, AZ 85003
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Strong troubleshooting and problem-solving skills in both control and field operations.
- Knowledge of control room systems (DCS/PLC) and plant instrumentation.
- Technical diploma or degree in Process Technology, Mechanical, Electrical, or Chemical Engineering (or equivalent experience).
- Requires use of PPE and strict compliance with safety standards.
- Familiarity with air separation technology, gas compression, and cryogenic systems.
- Minimum 3 years of hands-on experience within industrial facilities.
- Industrial facility environment with potential exposure to high noise and cryogenic gases.
Apply Directly
Assembly Solder Technician III, 2nd Shift (Onsite)
Collins Aerospace
Phoenix, AZ 85034
$3,000 bonus
OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Distinguishing colors and meeting vision requirements
- Using hands for extended periods of time to perform testing and troubleshooting tasks (e.g. grasping, holding, picking, placing, twisting, fine manipulation)
- U.S. citizenship is required, as only U.S. citizens are authorized to access information under this program/contract.
- Typically requires a HS Diploma or GED with a minimum of 2 years relevant experience or in the absence of a HS Diploma or GED, 4 years of relevant experience
- Bending, stooping, reaching, turning as needed to place units in test stands, pick up totes, place units on rack, etc.
- Must be able to stand for 2 hour increments without an opportunity to sit
- Must be able to lift 25 pounds
- This position is considered safety sensitive in accordance with FAA Guidelines. Candidate will be subject to drug and alcohol testing per FAA's regulation 14 CFR part 120, as well as 49 CFR part 40.
- To minimize safety risk to you and product, you must wear static-control and personal protective equipment.
- Transporting product with or without product carts
Apply Directly
Assembler - Hiring Now
Align Percision
Chandler, AZ 85249
~ 34 min Onsite
- Reads and interprets wiring lists and assembly drawings to work orders using work instructions
- Ability to use hands to finger, handle, or feel, as well as reach with hands and arms for extended periods of time
- Working knowledge of aircraft manufacturing, instructions and blueprints
- Specific vision abilities include close and distance vision, depth perception and ability to adjust focus
- Mastery of basic math (addition, subtraction, multiplication, division, and fractions)
- Ability to use calipers, micrometers, etc.
- Capable of standing for long periods
- Ability to read, understand and interpret engineering drawings and specifications (e.g., blueprint reading, specification, change, design).
- 0-1 years of relevant experience
- High school degree or equivalent
- Working knowledge of customer specifications and requirements
- Must be able to lift and/or move up to 50lbs
Apply Directly
Production Technician Lead (Shift: Tuesday - Friday 9:00 am to 7:30 pm)
Arrow Electronics
Phoenix, AZ 85004
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Identifies the problem and all relevant issues in straightforward situations, assesses each using standard procedures and makes sound decisions.
- Typically requires a 2 year degree and 2-4 years of experience or High school graduate with equivalent related experience.
- Has developed knowledge and skills through formal training or considerable work experience.
- Entry level often for those with work experience in the skill area.
- May require specific certifications.
- Works within established procedures with a moderate degree of supervision.
Apply Directly
Assembly B - Test
L3 Harris
Tempe, AZ 85285
~ 23 min OnsiteBilingual Preferred
- L3Harris maintains a drug-free workplace and performs pre-employment substance abuse testing and background checks, where permitted by law.
- Ability to clearly read, write, and understand English (required)
- Security clearances may only be granted to U.S. citizens.
- In addition, applicants who accept a conditional offer of employment may be subject to government security investigation(s) and must meet eligibility requirements for access to classified information.
- Please be aware many of our positions require the ability to obtain a security clearance.
- High School Diploma or equivalent with 4 years prior assembly experience, 2 year post-secondary/AA Degree and 0-2 years prior assembly experience.
Apply Directly
Assembly Mechanic - Various Shifts
Metso Outotec
Mesa, AZ 85201
~ 36 min Onsite
- Ability to use hydraulic pullers and presses for disassembly and assembly work.
- Candidate must have basic Mechanic Tools.
- High school diploma or equivalent.
- Ability to use precision measuring equipment such as micrometers, pi tapes, scales, etc. proficiently.
- It's important to have knowledge of machines and tools, including their designs, use, repair, and maintenance; knowledge of design techniques and principles involved in production of precision technical plans, blueprints, drawings, and models.
- Observes safety regulations and exhibits a high concern for safety.
- Understand mechanics of precision bearings, bushings, gearing as well as heating and cooling of components for disassembly and assembly of work.
- Prior repair experience with mining process equipment.
- Ability to analyze situations and problems, ability to detect technical discrepancies.
What companies are hiring Fabrication Engineering jobs in Phoenix,AZ?
- Precision Metal Products
- Precision Aerospace
- Federal Signal
- Mercury Systems
- Praxair, Inc - a Linde Company
- Collins Aerospace
- Align Percision
- Arrow Electronics
- L3 Harris
- Metso Outotec
- Precision Metal Products
- Precision Aerospace
- Federal Signal
- Mercury Systems
- Praxair, Inc - a Linde Company
- Collins Aerospace
- Align Percision
- Arrow Electronics
- L3 Harris
- Metso Outotec
What is the hourly salary range for Fabrication Engineering jobs in Phoenix,AZ?
The hourly salary range is $17 - $33.
The hourly salary range is $17 - $33.
