Home My Resume Saved Jobs Matches Feedback

591 Entry Level Quality Inspector jobs in Los Angeles,CA

Apply Directly

Quality Control Inspector III

Motorola Solutions

Los Angeles, CA 90079

$26-$27/hr

OnsiteHealth InsurancePaid Time OffRetirement Benefit

High School Diploma or GED required.
All employment is contingent upon the successful clearance of a background check.
Kneeling or squatting to access lower shelves.
Minimum 3 years of hands-on inspection experience with electronic components, mechanical assemblies, or similar systems.
Demonstrates ability to read and interpret complex technical documentation, including schematics, mechanical drawings, BOMs, and routing diagrams.
Walking/Moving in the labs.
Advanced proficiency using inspection tools and test equipment (e.g., multi-meters, calipers, micrometers, microscopes, torque drivers).
Capable of identifying, documenting, and communicating non-conformances and contributing to corrective/preventive actions.
Strong experience inspecting against IPC standards (J-STD-001, IPC-A-610, IPC-A-620), with working knowledge of defect criteria and process controls.
Occasional exposure to heat and cold.
Proficient with Google Workspace and Microsoft Office for reporting, documentation, and communication.
Must be able to lift up to 50 lbs. when receiving incoming part shipments.
Must possess strong organizational skills, attention to detail, and the ability to manage multiple priorities in a fast-paced environment.
Perform bending and reaching movements to place items on lower and higher shelves.
Excellent written and verbal communication skills.

SmartExplore AI is experimental.

Apply Directly

Quality Inspector

Leonardo DRS

Cypress, CA 90630

$25.29-$31.57/hr

~ 34 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

2+ years quality experience in a manufacturing/electronics environment.
Ability to use various measurement devices (calipers, pin gauges, go/no-go gauges, etc) to verify mechanical part compliance
In-depth knowledge of relevant manufacturing standards (such as J-Std-001/IPC-A-610) or common mechanical techniques (such as soldering, geometric dimensioning, and tolerance practices)
This position requires an active DOD security clearance or the ability to obtain such clearance within a reasonable time after commencement of employment.
U.S. Citizenship required.
Experience reading mechanical/blueprint drawings and able to verify parts dimensions against drawing requirements
Associates or higher degree required or equivalent experience.

SmartExplore AI is experimental.

New, Posted 1 day ago

Apply Directly

Assembler - Hiring Now

Eaton Aerospace

Los Angeles, CA 90079

$28-$35.40/hr

OnsiteHealth InsuranceRetirement Benefit

ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
High school diploma, GED or equivalent from an accredited institution is required.
Must have the ability to utilize hand tools such as, but not limited to, pliers, wrenches, screwdrivers, arbor press, vises, soldering iron, depth micrometers, calipers, lockwire pliers, dial indicators, pressure gauges, flow meters, multimeters, test boxes or specialized test equipment as needed.
All applicants must be U.S. persons within the meaning of ITAR.
Legally authorized to work in the United States without company sponsorship now or in the future.
Minimum of 4 years experience in aerospace manufacturing
No relocation benefit is offered for this position.
Minimum of 4 years minimum experience in assembly and testing of hydraulic and electromechanical actuators and working knowledge of hydraulic test equipment.
This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR).
Only candidates residing within 50 miles of Los Angeles, CA will be considered for this position.

SmartExplore AI is experimental.

Apply Directly

Quality Inspector III

Howmet Aerospace

Torrance, CA 90505

~ 24 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit

Employee must be legally authorized to work in the United States. Verification of employment eligibility will be required at the time of hire.
This position entails access to export-controlled items and employment offers are conditioned upon an applicant's ability to lawfully obtain access to such items.
Minimum 3+ suggested years of total quality experience in manufacturing or relevant aerospace industry experience
Visa sponsorship is not available for this position.

SmartExplore AI is experimental.

Apply Directly

Quality Assurance Inspector II

ARROWHEAD PRODUCTS CORPORATION

Los Alamitos, CA 90720

~ 31 min Onsite

Must be proficient with the use of the Internet, MS Word/Outlook.
Must be able to read and analyze engineering drawings and blueprints to determine requirements.
Requires High School degree or GED.
Push and pull 50 lbs.
Must be familiar with AS9102 standards and software, and military specifications.
Bend Occasionally
Requires 5+ years related Quality Assurance inspection experience.
Must be proficient in the use of basic inspection tools, calipers, scales, height gauges, optical aids, micrometers and GD&T.;
Must have experience with production processes such as assembly, forming, tooling, welding (fusion & resistance), heat treat, cleaning
ASQ Certified Quality Inspector (CQI) certification is expected to be achieved within 12 months from the first day of employment.
Lift up to 50 lbs.
Must have good organizational skills and maintain accurate, complete documentation.
Must have excellent communication skills, both written and oral.
Sit, Stand, and Walk Frequently
Working knowledge of NetInspect, Inspection Expert, AS9100, AS9101, Boeing, Northrop, Lockheed Martin, UTAS, Honeywell, and DCMA specifications.
Bend Occassionally
US Citizenship or permanent residency.
Must interface effective across organizational levels.
Talk and Listen Frequently
Experience must demonstrate ability to direct work activities of QC Inspectors I.
Must have experience with production machinery and equipment such as press forming, tube bending and other fabrication.
Experience must include interface with customer source representatives, government sources, internal departments and senior management.
Must have knowledge of metallic materials such as stainless, nickel, titanium, aluminum.
Must have experience with composites materials and production processes such as elastomers, resins, and composite reinforcement material.
Must be able to solve problems including root cause and corrective actions.

SmartExplore AI is experimental.

Apply Directly

MRO Quality Inspector

Ametek

Irwindale, CA 91706

Onsite

5+ years as a Quality Management in an overhaul & repair environment
A&P; License a Basic plus
Familiar with MRO documentation (Ex. Quality Control Manual (RSQCM), CMM (Component Maintenance Manuals), 8130's, Capabilities Manual
High School Diploma or equivalent
Knowledge of Microsoft Office (Word, Excel, and Outlook) as well as basic mathematical skills
Strong computer skills are a must, including Word, Excel, and PowerPoint (uniPoint is a plus)
5 years previous MRO quality experience
Must be able to communicate effectively (oral and written)

SmartExplore AI is experimental.

Apply Directly

Quality Control Inspector Specialist

Photo-Sonics

Chatsworth, CA 91311

~ 39 min Onsite

High School Diploma or equivalent work experience required
Position may require some climbing.
Establishes proper receiving inspection process
Discuss inspection results with those responsible for products. Recommends adjustments to the assembly or production process
7+ years of related quality control inspection experience.
Writes detailed inspection reports
Experience using an inspection arm required.
Inspects and tests products through complete manufacturing process to ensure all production procedure specifications are met
Detail Oriented
Complies with AS9100 Quality management system
Extensive knowledge of common inspection measuring equipment including, surface plates, micrometers, height gauges, radius gages, bore gauges, and dial indictors.
Coordinate MRB reviews
Operate electronic inspection equipment, such as coordinate-measuring machines (CMMs).
Ability to interface effectively with all levels of personnel.
Read and interpret information from planning documents, engineering drawings, quality control specifications, schematics, calibration reports and quality inspection procedures to develop accurate records of inspection
Calibrating hand tools
Inspects, tests, or measures materials or products being produced
Experience with testing electrical devices; voltmeters, ammeters, and ohmmeters to test potential difference, current flow, and resistance.
Coordinates calibration activities and maintain records of various tools, instruments and gauges used for Product acceptance or Verification/Validation
Approves incoming materials by confirming specifications; conducting visual and measurement tests; rejecting and returning unacceptable materials
Determines specifications by reading blueprints, specifications and other documents.
Assist with developing, maintaining or updating employee work instructions & quality systems procedures to continuously improve existing processes
Approves or rejects finished product
Good communication skills
Position requires ability to lift (15 lbs.), stand, walk for long periods of time.
Experience in MS Excel
Complies with ITAR/EAR
Performs inspections using Precision Measurement equipment/devices
Produces and processes NCMR reports

SmartExplore AI is experimental.

Apply Directly

Quality Inspector II

Hydraulics International

Chatsworth, CA 91311

~ 39 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Ability to interpret technical drawings and specifications.
High school diploma or equivalent.
Knowledge of quality control techniques and principles.
Ability to use standard inspection equipment (calipers, micrometers, height gage, thread gages, etc..),
Experience providing guidance and training to junior inspectors.
Ability to work independently and in a team environment.
Strong attention to detail and problem-solving skills.
Minimum of 2-3 years of experience in a similar role.

SmartExplore AI is experimental.

Apply Directly

Quality Inspector 2

Safran

Garden Grove, CA 92841

~ 40 min Onsite

Experience: 4-7 years.
Computer Skill: Familiar with Windows Operating System®. Basic skills with Microsoft office systems.
Protracted or irregular hours may be required.
More than 3 years
Traveling may be required.
Relocation to another Safran facility may be required.
High School Diploma/GED Equivalent
Must possess ability to use precision measuring instruments.
Education: High school diploma or equivalent.
Does require fluent communication in English language.
Ability to effectively use inspection tools such as calipers, micrometers, tape measures, etc.

SmartExplore AI is experimental.

Apply Directly