Commute Time
Date Posted
Title
Job Type
Benefits
Pay
182 Engineering jobs in Escondido,CA
Apply Directly
Assembler - Hiring Now
Solar Turbines Incorporated
San Diego, CA 92101
~ 34 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Willing to work any shift
- Any offer of employment is conditioned upon the successful completion of a drug screen
- High school diploma, GED, or equivalent
Apply Directly
Composite Technician I
General Atomics
San Diego, CA 92101
~ 34 min Onsite
- May require respirator certification.
- Capable of doing simple mathematical calculations
- Typically requires High School diploma or equivalent.
- Must be able to work in a loud environment
- Familiar with a variety of machinist hand tools and measuring instruments
- Must be able to verbally communicate, read and comprehend written and verbal instructions.
- Be able to lift assemblies weighing up to 50 lbs
- Must be familiar with blueprints and other similar drawings and documents
- Work extended hours as required
Apply Directly
Manufacturing Technician 1
Integrated Polymer Solutions
San Diego, CA 92121
~ 34 min OnsiteHealth InsuranceRetirement Benefit
- Years' Experience: Three to six months' related experience and/or training
- Able to communicate well with supervisor and follow work instructions.
- Must have ability to safely work with cutting knifes and steel rule dies.
- Ability to compute rate, ratio, and percent and to read and interpret metal rules.
- Ability to deal with problems involving a few concrete variables in standardized situations.
- Education: High School diploma or general education degree (GED) or equivalent combination of education and experience
- This position requires access to information subject to the International Traffic in Arms Regulations (ITAR).
- Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
- Employment is contingent upon the applicant being a "U.S. person" as defined by ITAR (22 CFR §120.15), which includes U.S. citizens, lawful permanent residents, refugees, or asylees, as required by U.S. export control laws.
- Ability to add, subtract, multiply, and divide in all units of measure, using whole numbers, common fractions, and decimals.
Apply Directly
Assembly, Integration and Test Technician
Leidos
San Diego, CA 92121
~ 34 min OnsitePaid Time OffRetirement Benefit
- Must be able to work overtime, including weekends and second or third shift as required.
- Ability to read and interpret technical drawings, engineering documents, and assembly instructions.
- High school diploma/GED
- Must be a US Citizen and meet the eligibility to obtain (and maintain) a Secret Clearance.
- Strong mechanical aptitude and hand-eye coordination.
- Basic computer skills and familiarity with ERP/shop floor systems.
- Proficient in using measurement tools (calipers, micrometers, height gauges).
- May require standing for long periods, lifting up to 50 lbs, and wearing PPE.
New, Posted 3 hours ago
Apply Directly
Assembler - Hiring Now
Ametek
San Diego, CA 92121
~ 34 min OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must require a minimum of 3 - 5 years of related experience.
- Must be able to use hand tools (i.e. torque wrench, drills and inspection tools).
- Must be able to communicate effectively with others.
- Due to the nature of Programmable Power programs and products, applicants must have the legal right to work in the U.S. and additionally must be legally authorized to access export-controlled information and source code.
- This position requires the ability to lift 25 pounds.
- Must possess good to excellent assembly blueprint reading experience/skills.
- Basic computer skills.
- High school diploma or equivalent
- Ability to properly read a variety of measuring devices including rulers, tape measures, and scales.
Apply Directly
3D Print Technician
Keysight Technologies
Escondido, CA
Onsite
- Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
- Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
- Mechanical aptitude and strong attention to detail
- High school diploma or equivalent
- Experience with Corel Draw design software.
- Experience with 3D printing technologies and materials
- Visa Sponsorship is not available for this position.
- 3D Print Technician
- Manual dexterity for handling small parts and tools
- Ability to lift up to 40 lbs.
- Familiarity with slicing software (e.g. Bambu Labs)
- Ability to troubleshoot technical issues
- Essentials: Experience with Bambu H2D, H2C and H2S printers.
Apply Directly
Welder - Hiring Now
BAE Systems
San Diego, CA 92113
~ 34 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to accomplish welding processes aboard vessels and shops.
- Able to use hand tools and power tools safely and efficiently.
- High School Diploma or GED or equivalent experience.
- Requires a minimum of 3 years related experience in craft.
- Able to calculate and understand units of measure, including fractions and decimals.
- Able to read, write and comprehend simple instructions
- Able to apply common sense understanding to carry out instructions in written, oral or diagram form.
- Welding test will consist of full penetration butt weld test plates in three positions each; overhead (4G), vertical (3G) and horizontal position (2G).
- Able to work at heights, in confined spaces and have the ability to climb staircases and ladders of varying sizes and grades.
- Ability to work a variety of shifts as needed (1st shift 6:00 am to 2:30 pm, 2nd shift 3:00 pm to 11:00 pm)
- Have working experience with Military Standard 1689, DM 10-623B and CG-47 Crack Repair Manual.
- Full penetration welds 2G and 3G with ceramic backing, 4G with permanent backing.
- Ability to interpret and understand NAVSEA drawings/blueprints.
- Able to accurately use tape measure for measurements.
- Able to understand, read and interpret welding symbols based on the requirements of Military Standard 22-D
- Able to wear appropriate protective equipment, including respirator.
- Able to obtain DBIDS credential/Government clearance to enter US Navy Vessels.
- Able to physically perform essential job duties with or without accommodations.
- Able to carry personal tool bag weighing up to 50 lbs.
- Able to pass a hands-on welding practical test on SMAW, FCAW and GMAW-P (5XXX Aluminum) by way of x-ray NDT.
Apply Directly
Network Engineering Technician
Cypher Analytics
San Diego, CA 92101
Requires Travel
- Experience with network configuration for L2/L3 switches, routers, security appliances (firewalls, NIDS, NIPS, etc).
- Ability to read and interpret installation and design drawings.
- Experience with hardware infrastructure installation (e.g., equipment mounting, cable pulling).
- Proven track record of performance in client facing roles that require engagement and relationship building with stakeholders across Navy programs, the DoD, or other federal agencies.
- Active Security Clearance is Required
- Experience in troubleshooting and restoring network and system outages.
- Experience in virtualization technologies.
- Experience with SDN/ SD-WAN Technologies and vendors including VMware, NSX-T, Cisco, Juniper, and open-source solutions.
- Experience developing and documenting network topologies.
- Minimum of 5 years' experience supporting the engineering of DoD Afloat Network systems (CANES, ADNS, ISNS, CENTRIXS, SCI Networks, SUBLAN, and/or COMPOSE).
- 3+ years of experience developing technical documentation.
- Shipboard experience required, including understanding of shipboard cable tables, physical layouts, and the flow of network infrastructure aboard Navy vessels.
Apply Directly
Mechanical Assembler
L3 Harris
San Diego, CA 92101
$22.83-$42.54/hr
~ 34 min OnsiteBilingual PreferredEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Able to lift minimum of 35 lbs.
- Able to work under Microscope.
- Ability to obtain a US Security Clearance
- Basic hand soldering of SMT, through-hole, and wiring.
- High level of accuracy and strong attention to detail.
- Ability to read assembly drawings, BOM, wire list, engineering change orders, rework instructions, and process control instructions.
- Mechanical assembly using crimping tool, hot plate and torque drivers.
- Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimium of 2 years of prior related experience.
- Able to work on ladder, crane and scaffolding.
Apply Directly
Solar Appointment Setter
Sunrun
Oceanside, CA 92054
$160,000/yr
~ 26 min OnsiteEducation AssistanceHealth InsuranceRetirement Benefit
- Reliable transportation within a 15-30 mile radius (on average) is essential for managing a multi-store territory.
- Commit to a flexible retail schedule, including weekends, evenings, and occasional holidays
- Standing and being mobile for extended periods
- The ability to lift up to 25 pounds as part of daily responsibilities in a retail environment
What companies are hiring Engineering jobs in Escondido,CA?
- Solar Turbines Incorporated
- General Atomics
- Integrated Polymer Solutions
- Leidos
- Ametek
- Keysight Technologies
- BAE Systems
- Cypher Analytics
- L3 Harris
- Sunrun
- Solar Turbines Incorporated
- General Atomics
- Integrated Polymer Solutions
- Leidos
- Ametek
- Keysight Technologies
- BAE Systems
- Cypher Analytics
- L3 Harris
- Sunrun
What is the hourly salary range for Engineering jobs in Escondido,CA?
The hourly salary range is $22.83 - $42.54.
The hourly salary range is $22.83 - $42.54.
