Commute Time
Date Posted
Title
Job Type
Benefits
Pay
255 Engineering jobs in Chino,CA
Apply Directly
Assembler - Hiring Now
General Micro Systems
Rancho Cucamonga, CA 91739
~ 25 min OnsiteEducation AssistanceHealth InsurancePaid Time Off
- In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
- Post-offer applicants must pass a drug screen test.
- Limited travel required
- If required, you must pass a background check and/or have the ability to obtain and maintain security clearance.
- Must be a US Citizen, Permanent US Resident, or currently authorized to work in the US on a full-time basis without current or future employment sponsorship.
- Minimum High School diploma or general education degree (GED)
- Experienced and familiar with electro-mechanical assembly processes and associated tools/instruments
- Must have experience reading assembly drawings/diagrams and completing work to specifications
- Must be able to work on site the standard 8 AM-5 PM, Monday - Friday schedule and overtime as required
- Minimum of 6 months hands-on assembly experience
- Must report to work at the scheduled time and maintain satisfactory attendance with limited unscheduled absences
- Lift up to 30 lbs.
New, Posted 2 hours ago
Apply Directly
Quality Technician
Stremicks Heritage Foods
Riverside, CA 92505
$27.50-$33.14/hr
~ 30 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Quality Technician
- Must be able to commute to Riverside, CA 92505
- Weekends as needed
- HACCP guidelines
- FDA regulations
- In person work location
- Coordinate measuring machines (CMM)
- Holidays
- Overtime
- Micrometers
- Night and/or swing shift
- Pay: $27.50 - $33.14 per hour
- Manufacturing: 1 year (Preferred)
Apply Directly
3D Print Technician
Keysight Technologies
Chino, CA
Onsite
- Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
- Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
- Mechanical aptitude and strong attention to detail
- High school diploma or equivalent
- Experience with Corel Draw design software.
- Experience with 3D printing technologies and materials
- Visa Sponsorship is not available for this position.
- 3D Print Technician
- Manual dexterity for handling small parts and tools
- Ability to lift up to 40 lbs.
- Familiarity with slicing software (e.g. Bambu Labs)
- Ability to troubleshoot technical issues
- Essentials: Experience with Bambu H2D, H2C and H2S printers.
Apply Directly
Mechanical Assembler
Curtiss-Wright
Brea, CA 92821
$27.40-$34/hr
~ 22 min OnsitePaid Time OffRetirement Benefit
- In the event information provided during the security screening reveals ineligibility to access export-controlled information, any offer of employment may be reconsidered or withdrawn.
- Metal fabrication experience including drilling, tapping, grinding, and cutting.
- Experience in a "made to order" manufacturing environment.
- Thorough understanding of mechanical systems.
- Ability to follow procedures and engineering drawings.
- 3-5 years mechanical experience with hydraulic equipment (valves, cylinders, pumps, actuators, etc.)
- This position may require exposure to export-controlled information and subject to additional security screening.
Apply Directly
Quality Inspector 2
Illinois Tool Works
Corona, CA 92878
~ 20 min Onsite
- The employee must occasionally lift and/or move up to 20 pounds.
- While performing the duties of this Job, the employee is regularly required to talk or hear.
- Strong attention to detail and ability to follow technical documentation.
- Basic computer skills required.
- High school diploma or general education degree (GED).
- Experience operating CMM equipment and interpreting measurement data.
- Experience using micrometer, calipers and other hand measuring tools.
- Specific vision abilities required by this job include close vision and color vision.
- Familiarity with quality alert systems and containment protocols.
- Basic understanding of GD&T; and inspection tools (calipers, micrometers, etc.).
- Meets attendance policy requirements.
- The employee is frequently required to stand and sit.
- Willing to work overtime as required.
Apply Directly
Assembler - Hiring Now
Ametek
Irwindale, CA 91706
Onsite
- Willing to perform repetitive tasks while sitting or standing for extended periods of time.
- Ability to perform work accurately and thoroughly.
- High School Diploma, or GED
- 1-3 years related experience and/or training; or equivalent combination of education, training and/or experience
- Ability to read and interpret documents such as blueprints, Parts Manuals, safety rules, operating and maintenance instructions, and procedure manuals.
- Must read, write and speak English fluently.
New, Posted 8 hours ago
Apply Directly
Assembler - Hiring Now
Vishay Intertechnology
Ontario, CA 91764
$18-$20/hr
~ 13 min Onsite
- "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.
- Demonstrate good written and communication skills
- As such, this position is open only to applicants who qualify as "U.S. Persons" as defined by 22 C.F.R. §120.15 is required.
- Be able to perform the basic process operations in the manufacturing of potentiometers in the assigned work centers while meeting labor standards
- Demonstrate knowledge, aptitude and manual coordination
- Ability to read, interpret and follow engineering drawings and specifications
- Utilize inspection gauges, tools and electronic test equipment
- This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations.
- High School diploma or equivalent
- This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as "U.S. Persons" according to U.S. federal law.
- Be able to work under a microscope
New, Posted 1 hour ago
Apply Directly
Quality Inspector and/or Fluorescent Penetrant Inspector
MW Industries
Corona, CA 92880
~ 20 min Onsite
- Know how to use basic and other quality tools such as Optical Comparator, CMM.
- Knowledge of AS9100 certified quality systems.
- Ability to complete AS9102 First Article Inspections and various reports.
- Understanding of ISO9001, AS9100 and other industry standards.
- High School Diploma Required
- Ability to read and understand technical documents and drawings.
- Computer skills including the use of Microsoft office tools and the maintenance of records and data.
- Work experience as a Welding Inspector or similar role in the aerospace industry
- Use of/application experience with process capability, SPC and problem analysis.
- Knowledge of and ability to use enterprise software (Visual/Uni-Point).
- May lift up to 50 lbs
- Minimum 3 years mechanical inspection in manufacturing environment required
- Must be able to read and interpret complex engineering blueprints, sketches, drawings, manuals, specifications that include GD&T; and knowledge of ANSI drawing standards.
- Basic math and calculating skills.
- Minimum 1-year FAIR IAW AS9102 experience.
- Must be experience with MS Windows based software (Word, Excel, PowerPoint, etc.)
- GD&T; knowledge with experience measuring dimensions within .0001
Apply Directly
Assembly Technician II
Advantech
Tustin, CA 92780
~ 35 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Effective verbal and written communication skills.
- Proficient in using basic mechanical assembly tools, including hand tools, power drivers, and torque drivers.
- Willingness to travel and provide offsite support when required.
- Capability to lift, carry, push, and pull items up to 35 lbs.; team assistance required for heavier items.
- To conform to U.S. Government export regulations (ITAR), applicant must be a U.S. citizen, lawful permanent resident of the U.S., protected individual as defined by 8. U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State. More information can be found at'
- Minimum 2 years of hands-on experience in complex computer hardware assembly or a related manufacturing environment.
- Ability to read and follow detailed technical instructions, SOPs, and BOMs.
- Read and follow engineering drawings, assembly diagrams, and Bills of Materials (BOMs) to ensure consistency and accuracy.
- Strong multitasking and time management skills to handle changing production schedules.
- Ability to perform repetitive tasks in a fast-paced manufacturing environment.
- Must wear back support belt for tasks involving lifting over 35 lbs.
- High school diploma or GED in a technical/scientific field required
- Analytical problem-solving skills with the ability to work independently.
- Strong attention to detail, quality, and accuracy.
- Ability to stand, walk, sit, kneel, and reach with hands and arms regularly.
New, Posted 1 hour ago
Apply Directly
Assembler - Hiring Now
Collins Aerospace
Riverside, CA 92506
$22.28-$49.49/hr
~ 30 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Typically, a HS Diploma or GED is required.
- This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here.
What companies are hiring Engineering jobs in Chino,CA?
- General Micro Systems
- Stremicks Heritage Foods
- Keysight Technologies
- Curtiss-Wright
- Illinois Tool Works
- Ametek
- Vishay Intertechnology
- MW Industries
- Advantech
- Collins Aerospace
- General Micro Systems
- Stremicks Heritage Foods
- Keysight Technologies
- Curtiss-Wright
- Illinois Tool Works
- Ametek
- Vishay Intertechnology
- MW Industries
- Advantech
- Collins Aerospace
What is the hourly salary range for Engineering jobs in Chino,CA?
The hourly salary range is $18 - $49.49.
The hourly salary range is $18 - $49.49.
