Home My Resume Saved Jobs Matches Feedback

288 Engineering jobs in Centerville,UT

New, Posted 12 hours ago

Apply Directly

Manufacturing Technician - Hiring Now

L3 Harris

Salt Lake City, UT 84118

~ 20 min OnsiteBilingual Preferred

Able to work small parts by hand using magnification
Able to lift 40 lbs
Work with chemicals, paints, and adhesives
Requires a High School Diploma or equivalent and a minimum of 4 years of prior relevant experience or 2 years post-Secondary/Associates degree with a minimum of 2 years of prior related experience

SmartExplore AI is experimental.

Apply Directly

Electro/Mechanical Assembler

Thales

Salt Lake City, UT 84111

~ 20 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

OHM meter
Performs assignments of an especially complex nature or gives technical guidance with limited or no supervision.
High school diploma or GED, with technical or vocational education in electronics and communications or previous experience, typically acquired with a minimum of 5 (five) years of experience assembling diversely complex electrical/mechanical components, sub-assemblies and assemblies in the requested subject of expertise.
Solder pots
Good with numbers, detail oriented and relevant organizational skills.
Torque tools
Small tools (all kinds)
Rivet machine
Applicants must be legally authorized to work in the United States for any employer at the time of hire.
Must be a U.S. Person as defined in applicable law, or otherwise authorized or eligible for authorization, to access to hardware, software, technology or technical data controlled under the International Traffic in Arms Regulations (ITAR) and/or the Export Administration Regulations (EAR).
Pliers
Sockets
Must be able to read and understand schematics and assembling instructions.
Wrenches
Drills stencils
Possess talents, ability and/or desire to learn, work in and support a structured team atmosphere.
Must be a US Person as defined in applicable law.
Wire stripper
Screwdrivers
Oven
Ability to operate/use wire cutters
Good verbal and written communication skills.
Soldering iron
Ability to pass the IPC and or J STD certification course.
Qualified candidates with [a] criminal history will be considered and are not automatically disqualified, consistent with federal law, state law, and local ordinances.
Silkscreen
Self-motivated, critical thinker with technical background.
This position is not eligible for visa sponsorship or for assuming sponsorship of an employment visa now or in the future.
Total Target Cash (TTC) 54,776.00 - 88,803.13 USD Annual
Crimpers
This position will require successfully completing a post-offer background check.

SmartExplore AI is experimental.

Apply Directly

Maintenance Technician

Barnes Group

Ogden, UT 84403

~ 28 min Onsite

Must have in-depth knowledge and electrical skills
Previous maintenance experience with industrial production systems, plumbing, control systems, welding, fabrication, and hydraulic systems.
Must have in-depth knowledge and ability to read and understand blueprints, electrical, machining, hydraulics, building maintenance schematics
Basic computer skills and PLC knowledge.
Ability to read, understand, and interpret drawings, schematics, and manuals.
Ability to operate a Drill Press, Power/Hand Tools, Measuring Equipment and Test Equipment such as a voltmeter.
High school diploma or GED required

SmartExplore AI is experimental.

Apply Directly

Quality Inspector (NDT Technician)

Precinmac

Ogden, UT 84403

~ 28 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Must work in a safe manner obeying all Petersen Inc. safety rules, and ensure the safety and health of himself/herself or others
Must be available and willing to travel as the employer determines is necessary or desirable to meet its business needs.
Must maintain regular and acceptable attendance at such level as determined in the employer's sole discretion.
Requires eyesight correctable to within normal range.
Be able to learn new software programs for (data entry/file maintenance),
Have enough experience, past training or education to become certified in weld inspection, or dye penetrant inspection/ magnetic particle inspection, ultrasonic inspection and radiographic testing
Be able to be certified as a Dye Penetrant/Mag Particle inspector, Ultrasonic and Radiographic inspection.
Requires occasional lifting of up to 50 pounds.
Previous experience required.
Be able to work overtime, some irregular hours and some weekends as schedule dictates.
Must maintain regular and acceptable attendance at such level as is determined in the employer's sole discretion.
Must be proficient in Microsoft word, Excel, Outlook.
Requires working in a shop environment- hot in the summer cool in the winter, noisy, and dusty.
Thorough understanding of geometric dimensioning and tolerancing (GD & T) in accordance with ANSI Y14.5.
Familiarity with basic inspection tools.
Requires manual dexterity and eye-hand coordination to properly use inspection tools.
Must be committed to a high standard of safety and be willing and able to comply with all safety laws and all of the employer's safety policies and rules and must be willing to report safety violations and potential safety violations to appropriate supervisory or management personnel.
Requires prolonged standing, bending, stooping, and stretching.
Requires mobility to access difficult inspection access areas.

SmartExplore AI is experimental.

Apply Directly

Quality Control Technician

HEXCEL CORPORATION

Salt Lake City, UT 84118

~ 20 min Onsite

High school diploma or general education degree (GED) required
Ability to conduct and understand basic arithmetic and measurements using a calculator and ruler
Basic computer skills
Ability to urgently address situations and events that require a quick response
Ability to physically perform the functions of the job
Eligible candidates must be a: U.S. citizen, U.S. national, person lawfully admitted for permanent residence, temporary resident under sections 210(a) or 245(A) of the Immigration and Nationality Act, person admitted in refugee status, or person granted asylum
Willingness to work overtime as needed

SmartExplore AI is experimental.

Apply Directly

Quality Inspector I-III, 2nd Shift 4PM-2:30AM

Nammo Defense Systems

Salt Lake City, UT 84118

~ 20 min Onsite

Can identify and accurately write up non-conformance reports with the QE guidance, when needed
Proficient in Excel, Word, SmarTeam, Epicor, and Outlook per job requirements
Capable of utilizing Excel, Word, SmarTeam, Epicor, and Outlook per job requirements
Basic understanding of Geometric Dimensioning and Tolerancing (GD&T;)
Able to train other Quality Technicians on a small number of skills and inspection plans
Can perform program specific inspection plans with no supervision
Can fill in for various programs at a Tech III level
Can identify and accurately write up non-conformance reports
Can perform program specific inspection plans with minimal supervision after training
Calipers, height gauges, OD/ID mics, Vernier scale, Romer Arm Usage, Optical Comparators, Pi Tapes
Able to train other Quality Technicians on a wide array of skills and inspection plans
High School Diploma or GED required
Can utilize the following items without supervision, and perform trouble shooting tasks
5+ years' relevant experience
Can perform program specific inspection plans with no supervision, and do basic troubleshooting tasks, when needed, for issues that arise
Basic understanding of dimensioning
In depth understanding of Geometric Dimensioning and Tolerancing (GD&T;)
Can utilize the following items without supervision, but may require assistance in troubleshooting: Calipers, height gauges, OD/ID mics, Vernier scale, Romer Arm Usage, Optical Comparators, Pi Tapes
10+ years' relevant experience

SmartExplore AI is experimental.

Apply Directly

M1 Armor Crewman

US ARMY

Salt Lake City, UT 84118

~ 20 min Onsite

Tener diploma de High School o GED
Cumplir con las reglas sobre los tatuajes
Ser ciudadano estadounidense o residente permanente con una Green Card válida
No tener complicaciones médicas
Tener entre 17 y 34 años de edad
No tener infracciones legales graves

SmartExplore AI is experimental.

Apply Directly

(USA) Technician, Facility Services, Irrigation Exterior Services

Walmart

Farmington, UT 84025

~ 7 min OnsiteBilingual PreferredHealth InsurancePaid Time OffRetirement Benefit

Hold a valid state-issued driver's license for at least 3 years with a clean driving record and ability to pass a Motor Vehicle Record (MVR) report
Valid, state-issued driver's license.
1-3 years of experience in the landscaping/irrigation industry, including plumbing and electrical troubleshooting.
18 years of age or older.

SmartExplore AI is experimental.

Apply Directly

Cargo Specialist - Hiring Immediately

U.S. Army

Salt Lake City, UT 84118

~ 20 min Onsite

High School Diploma or GED
No Major Law Violations
A U.S. Citizen or permanent resident with a valid Green Card
17 to 34 Years Old
No Medical Concerns
Meet Tattoo Guidelines

SmartExplore AI is experimental.

Apply Directly

Welder - Hiring Now

Oshkosh Corporation

Ogden, UT 84401

~ 28 min OnsiteRetirement Benefit

Current weld certification and ability to pass a weld test to assess skills (Vertical-Up T-Joint welds, Flat V-Groove welds, various 14-gauge welds, etc.).
Ability to read and comprehend work instructions and blueprints.
Ability to pass pre-employment background check, drug test, and hearing test.
This role required lifting up to 35lbs and involves physical activity such as standing, reaching and crouching throughout the day.
Ability to read a tape measure to 1/16".
Basic computer literacy.
Ability to add, subtract, multiply and divide using whole numbers, fractions and decimals.

SmartExplore AI is experimental.