Home My Resume Saved Jobs Matches Feedback

212 Echo Tech jobs in Fresno,CA

Apply Directly

Assembler - Hiring Now

Trillium Flow Technologies

Fresno, CA 93650

Onsite

Ability to read and interpret technical drawings and work instructions.
Trillium Flow is a background screening, drug-free workplace.
Requires frequent lifting, pushing, or pulling of heavy objects over 50 pounds.
Routine use of personal protective equipment (PPE) is required, including safety glasses, steel-toed shoes, and ear plugs.

SmartExplore AI is experimental.

Apply Directly

Helper

Packaging Corporation Of America

Kingsburg, CA 93631

~ 27 min Onsite

Be passionate about maintaining a safe work environment
Must be authorized to work in the U.S.
Must be able to work overtime and weekends as needed
Able to pass pre-employment background check and drug test
High School Graduate or GED
Must be willing to work overtime and weekends as needed

SmartExplore AI is experimental.

Apply Directly

Field Artillery Recruit - Hiring Immediately

U.S. Army

Fresno, CA 93722

OnsiteUrgently Hiring

6-10 weeks of Advanced Individual Training (AIT) dependent on MOS
Be a U.S. Citizen or permanent resident with a valid Green Card
87 ASVAB Score: General Technical (GT)
High School Diploma or GED
No Major Law Violations
17 to 34 Years Old
No Medical Concerns
10 weeks of Basic Training
Meet Tattoo Guidelines

SmartExplore AI is experimental.

Apply Directly

Maintenance Lead

Cargill

Fresno, CA 93650

$30-$36/hr

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Must have high school diploma or GED equivalent
Experienced using computers and a computerized maintenance management control system (SAP).
Working knowledge of Wielder mixers and grinders
Ability to breakdown and setup patty formers
6 - 8 years' industrial maintenance experience
Must be eligible to work in the United States without visa sponsorship
Must be 18 years or older
Minimum of 3 years of electrical skills

SmartExplore AI is experimental.

Apply Directly

Corrosion Technician

Orbis

Sanger, CA 93657

~ 22 min Onsite

High School Degree
Completion of Navy Basic Paint Inspector (NBPI) Coating Inspection Course or National Association of Corrosion Engineers (NACE) Level 1 Basic Course.
Knowledge of state-of-the-art coating systems established by NAVSEA 05M1 for critically coated surfaces, and the use of the CCIMS database and documentation of the coating inspections.
A secret security clearance
Three (3) years tank or corrosion inspection experience, in accordance with the Corrosion Control and Assessment Manual (CCAMM).
Ten (10) years experience in the inspection, maintenance and repair of tanks and voids, ventilation Plenums, trunks and bilges in accordance with NAVSEA Corrosion Control Assessment and Maintenance Manual (CCAMM), current revision (T-9630-AB-MMD-010/All USN Hulls).
Quantified specialized skills such as trade qualifications, manufacturer certifications of training for Coating systems and corrosion prevention may be substituted for up to two (2) years of technician experience for each major qualification or specialized trade skill.
Must be a U.S. citizen

SmartExplore AI is experimental.

Apply Directly

Travel Nuclear Medicine Technologist - $3,774 per week

TNAA TotalMed Allied

Madera, CA 93638

$3,774/wk

New, Posted 1 day ago

Apply Directly

Caregiver

Welbehealth

Fresno, CA 93722

$21-$25.22/hr

OnsiteBilingual PreferredHealth InsurancePaid Time OffRetirement Benefit

High school diploma or equivalency
Current Basic Life Support (BLS)/First Aid Certification required
Must be registered with Home Care Registry prior to start date
Must obtain CPR and First Aid certification within 180 days of hire and maintain certification thereafter
CPR and First Aid certification upon hire preferred

SmartExplore AI is experimental.

New, Posted 5 hours ago

Apply Directly

Controls Technician - Rocklin, CA

Trane Technologies

Fresno, CA 93722

$27-$42/hr

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

A High School Diploma or equivalent required, and typically at least 3-5 years of experience in HVAC/Controls
Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years
Must be able to reach your hands over your head
Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad)
Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15' to 20', and occasionally, up to 50 feet
This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs.
Must be able to twist the trunk of your body 90 degrees in each direction
Must be able to squat and touch the floor with both hands
Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal
Previous experience with DDC controls system preferred
Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties
Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours
Must be able to safely and legally operate a vehicle using a seat belt
Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less

SmartExplore AI is experimental.

Apply Directly

3D Print Technician

Keysight Technologies

Fresno, CA

Onsite

Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
Mechanical aptitude and strong attention to detail
High school diploma or equivalent
Experience with Corel Draw design software.
Experience with 3D printing technologies and materials
Visa Sponsorship is not available for this position.
3D Print Technician
Manual dexterity for handling small parts and tools
Ability to lift up to 40 lbs.
Familiarity with slicing software (e.g. Bambu Labs)
Ability to troubleshoot technical issues
Essentials: Experience with Bambu H2D, H2C and H2S printers.

SmartExplore AI is experimental.

New, Posted 21 hours ago

Apply Directly

Customs and Border Protection Officer

US Customs and Border Protection

Fresno, CA

$40,332-$109,952/yr

OnsiteBilingual PreferredHealth InsurancePaid Time OffRetirement Benefit

If you have previous or current law enforcement or military law enforcement experience, you may qualify at the GS-9 grade level.
Age Restriction: In accordance with Public Law 100-238, this position is covered under law enforcement retirement provisions. Candidates must be referred for selection to the Customs and Border Protection Officer position before reaching their 40th birthday in accordance with Department of Homeland Security Directive 251-03. The age restriction may not apply if you are currently serving or have previously served in a federal civilian law enforcement (non-military) position covered by Title 5 U.S.C. 8336(c) or Title 5 U.S.C. 8412(d).
You qualify for the GS-5 grade level if you possess one of the following:
Candidates assigned to the southern border, Miami, or Puerto Rico duty locations must attend and pass an online Spanish training program, which will be completed at their home port.
Experience: A minimum of three (3) years full-time general work experience that demonstrates the ability to meet and deal with people and the ability to learn and be able to apply a body of facts; OR
You qualify for the GS-7 grade level if you possess one of the following:
You must have had primary U.S. residency (includes protectorates as declared under international law) for at least three (3) of the last five (5) years.
· Utilizing observational techniques, evaluating facts, and reviewing documentation while applying Federal, State, or local laws and regulations.
Successful completion of the Academy is required for this position.
· Performing physical inspections of people, documents or goods for criminal activity, fraud, and/or illegal operations.
· Making determinations in compliance with laws and regulations that may lead to arrests, seizure of property, fines, and/or penalties based on findings.
Education Substitution: A bachelor's degree with Superior Academic Achievement based on (1) class standing, (2) grade-point average (3.0 or higher), or (3) honor society membership; OR one (1) full year of graduate-level education.
You must be a U.S. Citizen to apply for this position.
Experience: A minimum of one (1) year of specialized full-time work experience equivalent to at least the next lower grade level that includes:
The age restriction may not apply if you are Veterans' Preference eligible.
Education Substitution: A bachelor's degree or successful completion of a full four (4)-year course of study in any field leading to a bachelor's degree from an accredited college or university; OR
Combination of Experience and Education: A combination of successfully completed college education AND general work experience. This will be calculated using your resume and official or unofficial college transcripts submitted with your application.
OR for the GS-7 grade level:
The age restriction does not apply if you are Veterans' Preference eligible.
Formal Training: You will be required to complete a paid pre-academy orientation for approximately two (2) weeks at your home port.
Combination of Experience and Education: A combination of specialized work experience equivalent to the next lower grade level AND graduate level education from an accredited college or university. This will be calculated using your resume and official or unofficial transcripts submitted with your application.
You will then attend a 101-day training program – CBP Field Operations Academy – conducted at the Federal Law Enforcement Training Center (FLETC) located in Glynco, GA.
This training consists of basic law enforcement skills, immigration laws, firearms training, examination of cargo/bags/merchandise, physical fitness, etc.