Home My Resume Saved Jobs Matches Feedback

259 Dir Engineering jobs in Houston,TX

New, Posted 1 day ago

Apply Directly

Director of Engineering and Asset Management

Royal Vopak

Deer Park, TX 77536

Hybrid~ 34 minEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Knowledge and experience on the complete stage gate process (VPM) cycle.
Storage tanks (atmospheric, pressurized, refrigerated, cryogenic, etc)
Strong skills with software and computer tools.
Vapor Control Units (flares, thermal oxidizers, scrubbers, etc)
The employee may occasionally lift and/or move up to fifty (50) pounds.
Familiar with maintenance requirements in marine terminals (i.e. inspections per API 653, API 571, etc.)
Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus.
Truck and Rail (un)loading infrastructure
Experience managing multi-discipline engineering projects where complex interface management are required
Experience in the oil and gas industry & chemicals
Knowledgeable in different standards and recommended design practices typically applied in the Oil Gas and Chemical Industries (i.e. API, NFPA, IE, ISGOTT, etc.)
Basic process equipment (chillers, heaters, coils, etc)
Familiar with activities required for the application for permits and related regulatory requirements.
Support the development of detailed engineering design, including specifications, standards, specification of equipment and materials, operating parameters, automation, utilities.
Marine facilities (dock structures, topside equipment, etc)
The employee may be required to climb ladders/storage tanks up to 50' in height.
The employee may be required to travel by air, rail, bus, or car.
Mechanical rotary equipment (pumps, compressors)
The Company will not sponsor immigration or work visas.
The employee may be required to enter confined spaces.
Familiar with process hazard assessments (i.e. What If, HazOp, LOPA, etc).
Experience with execution of engineering activities in projects and interfaces between different disciplines.
Ensure engineering development of projects adheres with Vopak Standards and recognized industry practices.
At least 15 years in projects engineering experience & knowledge in Oil, Gas and Chemicals Terminals design (Operational Experience is a plus).
At least 15 years of project engineering experience especially Front End Design.
Must be able to wear PPE required by the location.
Bachelor's degree in Engineering, Mechanical Engineer or similar degree required
Familiar with New Energies projects like hydrogen, hydrogen carriers, energy storage, CCS, etc.
Must possess or be able to obtain a TWIC (Transportation Worker Identification Credential) as required by the Maritime Transportation Security Act.
Knowledge and understanding of the different contracting strategies: EPC, EPCM, E+P+C, etc.
Minimum of 15 years of relevant projects experience
Applicants must be eligible to work in the United States.
Minimum of 8 years technical management experience
Familiar with automation infrastructure (i.e. DCS, SIS, field instrumentation, etc)

SmartExplore AI is experimental.

Apply Directly

Production Technician

Air Liquide

La Porte, TX 77572

Requires Travel

High school diploma
2 - 3 years of industrial plant / cryogenic plant experience
Travel - 25% - 30%.
Experience troubleshooting equipment in a plant environment.
Must be willing to travel and support other Plant locations as needed.
Understanding of control valve functions and systems used to control flows & pressures on industrial tanks.

SmartExplore AI is experimental.

Apply Directly

M1 Armor Crewman

U.S. Army

Liberty, TX 77575

~ 59 min OnsiteUrgently Hiring

22 Semanas de One Station Unit Training, que incluye Basic Combat Training y Advanced Individual Training
Tener diploma de High School o GED
Cumplir con las reglas sobre los tatuajes
12 Certificaciones reconocidas a nivel nacional disponibles
Ser ciudadano estadounidense o residente permanente con una Green Card válida
No tener complicaciones médicas
Tener entre 17 y 34 años de edad
No tener infracciones legales graves
77 ASVAB Score: Combat (CO)

SmartExplore AI is experimental.

Apply Directly

Manufacturing Engineer II

Toshiba International Corporation

Houston, TX 77041

OnsiteBilingual Preferred

BSEE, BSME, BSIE
Ability to lift up to 40 lbs., standing, stooping, climbing, kneeling, crawling
Will utilize ERP with intermediate knowledge for assigned tasks such as pulling Bill of Materials (BOM) or pulling drawings from product life cycle management (PLM), engineering software tools or internal databases.
5-10 years relevant work experience

SmartExplore AI is experimental.

Apply Directly

Applications Engineer

Dover Corporation

Houston, TX 77047

OnsiteHealth InsurancePaid Time OffRetirement Benefit

Working knowledge of 2D and 3D CAD
Present in weekly department meetings, reporting on business conditions and issues with customers
Provide feedback to relevant company departments to determine root cause / corrective and preventive actions
Ability to work with mathematical concepts such as probability and statistical inference, structural and fluid dynamics, and fundamentals of plane and solid geometry and trigonometry
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
Significant customer interaction with respect to the engineering and management of projects, pre and post contract, for assigned accounts
Strong understanding of product failure modes and excellent, proven problem solving skills
Highly desirable to have experience with FEA, simulation techniques and scientific programming
Check drawings for accuracy of dimension and detail, and manage their subsequent delivery / approval with customers
Build an understanding of competitor solutions, recommend and implement actions as necessary to defend and grow accounts
Good oral and written communication skills, including the ability to present information and respond to questions from groups of managers, customers and peers
Perform inspections on used parts and provide detailed repair instructions and new design specifications using reverse engineering methods
Facilitate and manage customer meetings with pre-set agenda outlining what you expect to achieve, followed by trip report sharing knowledge, and actions items clearly defined with time frame for completion
Develop close working relationships with key customers' technical contacts, ensuring that business opportunities are recognized and responded to appropriately at an early stage
Follow up open proposals and report status on a regular and timely basis
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists
Perform design reviews, resolve non-conformance issues, and prepare Engineering Change Notices
Lead fluid film bearing training seminars at customer and/or internal sites as needed and be able to fine-tune the training to the specific needs of the audience
Experience in the design of fluid film bearings, seals and bearing failure analysis is highly desired
Support engineering process development and design for manufacturability efforts through specific assignments as directed by Engineering Management
Ability to read drawings and prepare graphs, tables, and text for final reports and to write procedure manuals
Master's preferred
Create component and assembly level drawings using 3D CAD software
Bachelor's Degree in Mechanical or Aerospace Engineering
Established work experience in an engineered product environment, preferably rotating equipment, with proven skills and experience in performing Rotordynamics Analysis (RDA)
Respond to customer concerns and resolve any technical problems to ensure that company products are working effectively and the customer is satisfied with the service provided
Build and maintain an understanding of manufacturing capabilities and standard design practices sufficient to produce the best-cost alternative for the customer and the company
Conduct all necessary engineering calculations, including Finite Element Analysis (FEA) and Rotordynamic Analysis (RDA)
Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, specifications and governmental regulations
Strong understanding and engineering principles and design practices
Proficiency with MS Office and Windows operating systems is expected
Prepare engineering proposals for new projects; identify requirements, analyze product designs, interpret results and determine optimum solution to the customers' problem

SmartExplore AI is experimental.

Apply Directly

Advanced Manufacturing Engineering - Baytown TX - MBPP

Exxon Mobile

Baytown, TX 77520

~ 41 min OnsiteHealth InsuranceRetirement Benefit

Demonstrated design experience
Leadership skills to influence Operations team
Capable of working with and leading teams effectively
B.S. (or higher) degree in Civil, Mechanical, or Chemical Engineering
Mentor / role model for setting work standards and business ethics
Excellent interpersonal and communication skills
5+ years of industry-related experience
Capable of working independently and achieving high standards

SmartExplore AI is experimental.

Apply Directly

Quality Control Inspector

Oceaneering

Houston, TX 77041

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Operate a motor vehicle.
Skilled in reading dials and digital displays, comparing results to specifications, recording test and inspection data, and collaborating with engineers, technicians, and production personnel.
Working knowledge of Microsoft Word and Microsoft Excel.
Ability to perform dimensional checks and visual inspections of raw materials, fasteners, fabricated, and machined parts in accordance with acceptance criteria.
Work in confined spaces, kneel, jump, run, work while lying on stomach/back, crawl, and use repetitive movements of the arms and hands.
Wear PPE for skin protection.
Lift 10-25 pounds.
Lift up to 10 pounds.
Proficient in the use of advanced quality inspection techniques.
Understand and adheres to requirements of Gage Calibration, and Measurement System Analysis (MSA).
Lift 20-50 pounds.
Identify color differences.
Knowledge of ISO 9001 requirements.
Twist body, sit with back supported, head forward/flexed, head tilted/rotated, and work with arms extended overhead.
Climb stairs/ladders, stand, balance, stoop, squat, reach, and lift/carry objects.
Shall be capable of completing inspections, such as: FAT, SIT, FAI, In-Process, Final, Receiving inspections.
Interpret inspection results.
Minimum of 3-5 years of Quality Control experience and/or training; or equivalent combination of education and experience.
Wear PPE protection for body, vision, and hearing protection.
Must have a thorough understanding of advanced measurement techniques, and a basic understanding of Statistical Process Control.
Issues document, investigate, and track non conformances and inspection records in the following SmartSolve modules: Inspection Management, Non Conformance and Corrective Action/Preventive Action.
Develop and maintain inspection plans per drawing requirements.

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

Atlas Copco

Houston, TX 77002

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Comfortable working in a fast-paced, production-driven environment.
Capable of lifting 40 lbs. as needed.
High school diploma or equivalent (GED) required.
Ability to read technical documents, schematics, and manuals.
Familiarity with basic tools and assembly procedures.
Basic math and measurement skills.
Attention to detail and strong problem-solving skills.
Good manual dexterity and coordination.
Ability to stand for extended periods and perform repetitive tasks.

SmartExplore AI is experimental.

Apply Directly

Maintenance Manager

Refresco

Houston, TX 77246

OnsiteHealth InsurancePaid Time OffRetirement Benefit

Previous preventative maintenance programs experience required.
Must be flexible to work alternate shifts if production needs allow.
Strong leadership capabilities in a fast-paced production environment required.
Work environment - Work and environment are very repetitive.
Undergraduate Degree (or equivalent experience) plus eight (8) years of experience in a high speed manufacturing environment with a mechanical/electrical background required.
Proficient in Microsoft Office (Windows, Excel, & Outlook) with the ability to learn new applications as required.
An understanding of Safe Quality Food (SQF), responsibility for Food Safety /Food Quality and the responsibility to take action when notified or becomes aware of any Food Safety or Food Quality issue.
Visual/Sensory - This position requires regular need to give moderate attention with one or two senses at a time.
Climate - This position requires the incumbent to have the ability to work in ambient hot and/or cold seasonal environments.
Physical - Continuously standing or walking. Regular requirements to lift/handle/carry material or equipment of moderate weight.

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

Oshkosh Corporation

Houston, TX 77002

Onsite

One (1) or more years of relevant experience in Manufacturing or General Labor.
Physical Demands: Frequent Hearing, Talking, Visual, Standing, Walking/Running, Reaching, Driving, Fine Dexterity, Manual Dexterity, Upper Extremity Repetitive Motion; Occasional Climbing, Bending/Kneeling, Lifting/Carrying up to 40lbs., Pushing/Pulling up to 40lbs.; Seldom Typing, Sitting.
High School Diploma or equivalent.

SmartExplore AI is experimental.