Home My Resume Saved Jobs Matches Feedback

360 Dir Digital Experience Engineering jobs in Houston,TX

Apply Directly

Director of Engineering and Asset Management

Royal Vopak

Deer Park, TX 77536

Hybrid~ 34 minEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Knowledge and experience on the complete stage gate process (VPM) cycle.
Storage tanks (atmospheric, pressurized, refrigerated, cryogenic, etc)
Strong skills with software and computer tools.
Vapor Control Units (flares, thermal oxidizers, scrubbers, etc)
The employee may occasionally lift and/or move up to fifty (50) pounds.
Familiar with maintenance requirements in marine terminals (i.e. inspections per API 653, API 571, etc.)
Specific vision abilities required by this job include close vision, peripheral vision, depth perception and ability to adjust focus.
Truck and Rail (un)loading infrastructure
Experience managing multi-discipline engineering projects where complex interface management are required
Experience in the oil and gas industry & chemicals
Knowledgeable in different standards and recommended design practices typically applied in the Oil Gas and Chemical Industries (i.e. API, NFPA, IE, ISGOTT, etc.)
Basic process equipment (chillers, heaters, coils, etc)
Familiar with activities required for the application for permits and related regulatory requirements.
Support the development of detailed engineering design, including specifications, standards, specification of equipment and materials, operating parameters, automation, utilities.
Marine facilities (dock structures, topside equipment, etc)
The employee may be required to climb ladders/storage tanks up to 50' in height.
The employee may be required to travel by air, rail, bus, or car.
Mechanical rotary equipment (pumps, compressors)
The Company will not sponsor immigration or work visas.
The employee may be required to enter confined spaces.
Familiar with process hazard assessments (i.e. What If, HazOp, LOPA, etc).
Experience with execution of engineering activities in projects and interfaces between different disciplines.
Ensure engineering development of projects adheres with Vopak Standards and recognized industry practices.
At least 15 years in projects engineering experience & knowledge in Oil, Gas and Chemicals Terminals design (Operational Experience is a plus).
At least 15 years of project engineering experience especially Front End Design.
Must be able to wear PPE required by the location.
Bachelor's degree in Engineering, Mechanical Engineer or similar degree required
Familiar with New Energies projects like hydrogen, hydrogen carriers, energy storage, CCS, etc.
Must possess or be able to obtain a TWIC (Transportation Worker Identification Credential) as required by the Maritime Transportation Security Act.
Knowledge and understanding of the different contracting strategies: EPC, EPCM, E+P+C, etc.
Minimum of 15 years of relevant projects experience
Applicants must be eligible to work in the United States.
Minimum of 8 years technical management experience
Familiar with automation infrastructure (i.e. DCS, SIS, field instrumentation, etc)

SmartExplore AI is experimental.

Apply Directly

Native AI Enterprise Architect Director (REMOTE)

NTT DATA

Houston, TX

RemoteHealth InsurancePaid Time OffRetirement Benefit

Apply Directly

Principal Software Engineer

ENA Corporate

Houston, TX 77246

Hybrid

Front-end development experience with Angular.
Bachelor's degree in Computer Science, Software Engineering, or related field.
Experience with Azure services (AKS, Functions, App Services, Data Lake, Data Factory, Logic Apps).
Familiarity with service-oriented architectures and containerization.
Proven experience designing scalable, high-performance applications.
Cloud development experience (preferably Microsoft Azure) and DevOps (CI/CD).
This role is open to candidates based in Houston, TX; Pittsburgh, PA; or Minneapolis, MN.
Strong skills in C#, JavaScript/TypeScript, Angular, and Entity Framework.
Ability to balance hands-on coding with leadership and mentoring responsibilities.
Solid understanding of databases (SQL Server) and object-oriented programming.
5+ years of professional .NET development experience.
Experience with Clean Architecture, Domain-Driven Design (DDD), Microservices, and development best practices.

SmartExplore AI is experimental.

Apply Directly

Applications Engineer

Dover Corporation

Houston, TX 77047

OnsiteHealth InsurancePaid Time OffRetirement Benefit

Working knowledge of 2D and 3D CAD
Present in weekly department meetings, reporting on business conditions and issues with customers
Provide feedback to relevant company departments to determine root cause / corrective and preventive actions
Ability to work with mathematical concepts such as probability and statistical inference, structural and fluid dynamics, and fundamentals of plane and solid geometry and trigonometry
Ability to interpret a variety of instructions furnished in written, oral, diagram, or schedule form
Significant customer interaction with respect to the engineering and management of projects, pre and post contract, for assigned accounts
Strong understanding of product failure modes and excellent, proven problem solving skills
Highly desirable to have experience with FEA, simulation techniques and scientific programming
Check drawings for accuracy of dimension and detail, and manage their subsequent delivery / approval with customers
Build an understanding of competitor solutions, recommend and implement actions as necessary to defend and grow accounts
Good oral and written communication skills, including the ability to present information and respond to questions from groups of managers, customers and peers
Perform inspections on used parts and provide detailed repair instructions and new design specifications using reverse engineering methods
Facilitate and manage customer meetings with pre-set agenda outlining what you expect to achieve, followed by trip report sharing knowledge, and actions items clearly defined with time frame for completion
Develop close working relationships with key customers' technical contacts, ensuring that business opportunities are recognized and responded to appropriately at an early stage
Follow up open proposals and report status on a regular and timely basis
Ability to solve practical problems and deal with a variety of concrete variables in situations where only limited standardization exists
Perform design reviews, resolve non-conformance issues, and prepare Engineering Change Notices
Lead fluid film bearing training seminars at customer and/or internal sites as needed and be able to fine-tune the training to the specific needs of the audience
Experience in the design of fluid film bearings, seals and bearing failure analysis is highly desired
Support engineering process development and design for manufacturability efforts through specific assignments as directed by Engineering Management
Ability to read drawings and prepare graphs, tables, and text for final reports and to write procedure manuals
Master's preferred
Create component and assembly level drawings using 3D CAD software
Bachelor's Degree in Mechanical or Aerospace Engineering
Established work experience in an engineered product environment, preferably rotating equipment, with proven skills and experience in performing Rotordynamics Analysis (RDA)
Respond to customer concerns and resolve any technical problems to ensure that company products are working effectively and the customer is satisfied with the service provided
Build and maintain an understanding of manufacturing capabilities and standard design practices sufficient to produce the best-cost alternative for the customer and the company
Conduct all necessary engineering calculations, including Finite Element Analysis (FEA) and Rotordynamic Analysis (RDA)
Ability to read, analyze and interpret general business periodicals, professional journals, technical procedures, specifications and governmental regulations
Strong understanding and engineering principles and design practices
Proficiency with MS Office and Windows operating systems is expected
Prepare engineering proposals for new projects; identify requirements, analyze product designs, interpret results and determine optimum solution to the customers' problem

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

Atlas Copco

Houston, TX 77002

OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit

Comfortable working in a fast-paced, production-driven environment.
Capable of lifting 40 lbs. as needed.
High school diploma or equivalent (GED) required.
Ability to read technical documents, schematics, and manuals.
Familiarity with basic tools and assembly procedures.
Basic math and measurement skills.
Attention to detail and strong problem-solving skills.
Good manual dexterity and coordination.
Ability to stand for extended periods and perform repetitive tasks.

SmartExplore AI is experimental.

Apply Directly

Electrical Engineer EDH Engineering Katy

Powell Industries

Houston, TX 77246

OnsiteHealth InsurancePaid Time OffRetirement Benefit

Able to form and apply cost competitive techniques to develop the most cost-effective solution for the engineered to order product
Strong problem-solving skills, and the ability to troubleshoot complex system-level problems
Solid understanding of one-line and three-line drawings, control schematics, and point to point wiring diagrams
** _The Lead Engineer level_** requires Bachelor's degree in an engineering discipline and 7-10 years of relevant job related experience
BS Degree in Electrical Engineering, Electrical Technology or related area
Proficient in electrical SWGR design and control schemes.
Advanced drafting/ACAD skills
Highly self-motivated in working on “first-of-its-kind” projects that require resilience and tenacity
** _The Senior Engineer level_** requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience
** _The Senior Engineer level requires a Bachelor's degree in an engineering discipline and 4-8 years of relevant job related experience
Minimum 4-8 years of experience in an Engineering role
Ability to manage & prioritize multiple projects, schedules and budgets in a fast-paced environment
Demonstrated ability to work collaboratively with others in a cross-functional team environment
Possess a strong customer service commitment
Proficient at project specification and drawing reviews (i.e., acquired knowledge of specification items that Powell should take exception to and specification items that require special attention; able to accurately interpret client specifications, etc.)
Proficient in understanding power systems and relay applications as applied to switchgear products
Familiarity with power distribution equipment (three phase systems, relays, transformers, control switches, etc.)
Solid organization, communication, presentation and planning skills
Experience in carrying out engineering development types of tasks and addressing production issues
Good understanding of 480V through 38kV electrical distribution and switchgear operation
Familiar with applicable sections of the National Electric Code and other codes and standards such as IEEE, ANSI and UL
** _The Engineer level_** requires a Bachelor's degree in an engineering discipline and 0-3 years of relevant job related experience

SmartExplore AI is experimental.

Apply Directly

Assembler - Hiring Now

Oshkosh Corporation

Houston, TX 77002

Onsite

One (1) or more years of relevant experience in Manufacturing or General Labor.
Physical Demands: Frequent Hearing, Talking, Visual, Standing, Walking/Running, Reaching, Driving, Fine Dexterity, Manual Dexterity, Upper Extremity Repetitive Motion; Occasional Climbing, Bending/Kneeling, Lifting/Carrying up to 40lbs., Pushing/Pulling up to 40lbs.; Seldom Typing, Sitting.
High School Diploma or equivalent.

SmartExplore AI is experimental.

Apply Directly

Production Technician

Praxair, Inc - a Linde Company

Pasadena, TX 77506

~ 33 min OnsiteHealth InsurancePaid Time OffRetirement Benefit

Must be able to manage confined space entry
Climb ladders and steps
Work at heights
High School Diploma or equivalent is required.
Lift up to 50 lbs

SmartExplore AI is experimental.

Apply Directly

Assembler

Alfa Laval

Houston, TX 77038

$23-$25/hr

OnsiteHealth InsurancePaid Time OffRetirement Benefit

Experience with pneumatic and hand tools, basic Engineering drawings, and basic electrical and hydraulic terminology.
You have a high school diploma or equivalent (G.E.D.) with relevant experience, and:
Currently, this is an on-site opportunity located in Houston-TX.
Minimum 1 year of professional experience in the assembly of mechanical equipment or a similar field.

SmartExplore AI is experimental.

Apply Directly

In Home Sales Representative

Erie Home

Pasadena, TX 77504

$125,000-$250,000/yr

~ 33 min OnsiteHealth InsuranceRetirement Benefit

Valid driver's license, reliable transportation with auto insurance, and the ability to travel to and from in-home appointments.
No sales or construction experience needed
Midday, evening, & weekend availability

SmartExplore AI is experimental.