Commute Time
Date Posted
Title
Job Type
Benefits
Pay
487 Developer Full Stack jobs in Los Angeles,CA
Apply Directly
Software Development JOB Training Opportunity
Year Up United
Los Angeles, CA 90079
$525/wk
Onsite
- You may be required to answer additional screening questions when applying
- Have not obtained a Bachelorʼs degree
- Eligible to work in the U. S.
- A high school graduate or GED recipient
- Highly motivated to learn technical and professional skills
Apply Directly
3D Print Technician
Keysight Technologies
Los Angeles, CA
Onsite
- Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
- Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
- Mechanical aptitude and strong attention to detail
- High school diploma or equivalent
- Experience with Corel Draw design software.
- Experience with 3D printing technologies and materials
- Visa Sponsorship is not available for this position.
- 3D Print Technician
- Manual dexterity for handling small parts and tools
- Ability to lift up to 40 lbs.
- Familiarity with slicing software (e.g. Bambu Labs)
- Ability to troubleshoot technical issues
- Essentials: Experience with Bambu H2D, H2C and H2S printers.
Apply Directly
Electronics Assembler A (1st Shift)
Eaton Aerospace
Los Angeles, CA 90079
$25/hr
OnsiteHealth InsuranceRetirement Benefit
- High School diploma, GED or equivalent from an accredited institution is required.
- No relocation benefit is offered for this position. Only candidates residing within 50 miles of Los Angeles, CA facility will be considered for this position.
- Interpret blueprints, verbal, and/or written instructions
- Mininmum of two (2) years' experience in soldering and assembly manufacturing of electronic assemblies
- Eaton will consider for employment, qualified applicants with criminal histories in a manner consistent with the requirements of the FCIHO.
- Legally authorized to work in the United States without company sponsorship now or in the future.
- Lifting requirements: Ability to lift up to 50lbs (group lifts over 35lbs)
- Per day: Sitting, standing, walking, squatting
- This position requires use of information or access to hardware which is subject to the International Traffic in Arms Regulations (ITAR).
- Pulling frequently, reaching frequently
- Lifting/Carrying: Knees, Waist
- Must have the ability to utilize hand tools such as, but not limited to air drivers, crimpers, pliers, wrenches, screwdrivers, arbor press, vises, depth micrometers, measuring tools, calipers, lockwire pliers and soldering tools.
- All applicants must be U.S. persons within the meaning of ITAR. ITAR defines a U.S. person as a U.S. Citizen, U.S. Permanent Resident (i.e. 'Green Card Holder'), Political Asylee, or Refugee.
New, Posted 16 hours ago
Apply Directly
Assembler - Hiring Now
Teledyne
Hawthorne, CA 90250
~ 21 min OnsiteFlexible ScheduleHealth InsurancePaid Time OffRetirement Benefit
- Must be a U.S. Person (includes U.S. citizens, lawful permanent residents, refugees, and asylees) (required)
- Employment is contingent on background checks and compliance with applicable regulations.
- Good eye-hand coordination and ability to work with small parts (required)
- High school diploma or equivalent (required)
- Ability to read and interpret written procedures and safety rules (required)
- Basic computer skills for data entry (required)
- Background checks may include, but are not limited to, education verification, employment history and verification, criminal convictions, Motor Vehicle Report (MVR & driving history), reference check, credit checks/credit history and drug testing.
- Strong communication skills for documentation and teamwork (required)
- Comfortable using hand tools and microscopes (required)
Apply Directly
Manufacturing Technician - Hiring Now
Nikon Corporation
Long Beach, CA 90808
~ 29 min OnsiteFlexible Schedule
- Knowledge of raw materials, production processes, quality control, and cost optimization techniques in additive manufacturing.
- Occasionally ascend/descend ladders.
- Familiarity with machines and tools used in additive manufacturing operations, including EOS and SLM equipment.
- REQUIRED: Compliant with the International Traffic in Arms Regulations (ITAR defines "U.S. Person" as a U.S. Citizen or U.S. Permanent Resident)
- Acquire proficiency in technical material related to additive manufacturing and machine maintenance.
- REQUIRED: Obtain and maintain a security clearance.
- REQUIRED: Compliant with the International Traffic in Arms Regulations (ITAR) which requires U.S. person status (ITAR defines "U.S. Person" as a U.S. Citizen or U.S. Permanent Resident)
- Move, position, lift, and stack parts weighing up to 50 pounds on a daily basis.
- Utilize digital applications on interfaces like tablets or smartphones proficiently.
- Regularly push carts, RUWAC vacuums, and other machinery throughout the facility.
- Properly wear personal protective gear throughout the day, including gloves, hearing protection, eye protection, protective footwear, and respirators.
- Communicate with teammates and internal stakeholders regularly regarding daily updates, hazard concerns, questions, and issues.
- REQUIRED: Able to work flexible hours, according to the schedule of the machine builds
- Maintain a stationary position for up to three hours as needed.
- Utilize precision measuring instruments such as calipers, micrometers, and dial indicators.
- Proficiency with various pneumatic and hand tools.
Apply Directly
Assembler - Hiring Now
Hottinger Brüel & Kjær
Los Angeles, CA 90079
$20-$23/hr
OnsiteEducation AssistancePaid Time OffRetirement Benefit
- Certified for J-STD C or IPC-610.
- 3-5 years of experience in electromechanical assembly, soldering under a microscope
- Must be able to read and understand engineering assembly drawings.
- Candidates must be legally authorized to work in the United States full-time and will not require sponsorship either now or in the future to obtain an employment visa.
- Good dexterity of hands and eyes.
- ITAR defines a U.S. person as a U.S. citizen, U.S. permanent resident (i.e., 'green card holder'), political asylee, or refugee.
- This position requires the use of information that is subject to the International Traffic in Arms Regulations (ITAR). All applicants must be U.S. persons within the meaning of ITAR.
- Good mechanical aptitude.
- Must be a local candidate.
- Advanced schematic reading and ability to troubleshoot assemblies.
Apply Directly
Assembler - Hiring Now
Matheson Tri-Gas
Baldwin Park, CA 91706
$23/hr
~ 26 min Onsite
- Must be able to read blueprints and follow work instructions.
Apply Directly
HELPER~2ND SHIFT
Packaging Corporation Of America
Santa Fe Springs, CA 90670
$20.57/hr
~ 21 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Be passionate about maintaining a safe work environment
- May be required to stack parts up to 30 lbs. for a period of up to 12 hours
- Must be authorized to work in the U.S.
- Must be able to work overtime and weekends as needed
- Must be willing to work the SECOND SHIFT (3PM start daily)
- Must have a good attendance record
- High School Graduate or GED
- Work overtime as needed
Apply Directly
Warehouse Operations Specialist
FedEx Logistics
Gardena, CA 90248
$28.63/hr
~ 17 min OnsiteEducation AssistanceHealth InsuranceRetirement Benefit
- Thorough knowledge of distribution activities.
- Ability to lift 30 lbs regularly and more with appropriate assistance.
- Ability to be certified on all Machine Handling Equipment (MHEs) within the facility. This includes Forklifts, pickers and reach-trucks,both Propane and Electric, and to operate these in a safe and compliant manor
- Ability to work within a schedule and prioritize work to meet deadlines.
- One (1) of relevant Warehouse or related experience
- Knowledge of all aspects of CFS and/or FTZ Operations (site specific)
- One (1) of International Freight Forwarding Warehouse Operations experience preferred
- Good math skills.
- When applicable, must be licensed to operate a vehicle and comply with all state and federal DOT regulations which include passing a physical and being 21 years of age.
- Must have DG Awareness training completed
- Ability to use good safety judgment.
- Excellent organizational skills for freight compliance.
- When applicable, must have valid travel documentation (i.e. Passport) in order to cross the border.
- TSA Certified for operating within a CCSF (site specific)
- HS Diploma/GED required.
- Excellent communication and comprehension skills.
Easy Apply
Product Development Specialist
Bunzl
Cerritos, CA 90703
~ 27 min OnsiteRetirement Benefit
- Strong analytical and critical thinking skills, with the ability to make data-driven decisions.
- Initiative-taker, collaborator, strong follow up skills with a sense of urgency, and must be deadline oriented.
- Proficient with Microsoft Office: Excel, Word, Outlook, and Adobe Illustrator.
- Strong project management skills, including the ability to manage multiple projects simultaneously.
- Customer-centric and innovative, with excellent design and conceptual skills.
- 3+ years of experience in product development
- High school diploma/GED or equivalent required
- Excellent communication and collaboration skills.
What companies are hiring Developer Full Stack jobs in Los Angeles,CA?
- Year Up United
- Keysight Technologies
- Eaton Aerospace
- Teledyne
- Nikon Corporation
- Hottinger Brüel & Kjær
- Matheson Tri-Gas
- Packaging Corporation Of America
- FedEx Logistics
- Bunzl
- Year Up United
- Keysight Technologies
- Eaton Aerospace
- Teledyne
- Nikon Corporation
- Hottinger Brüel & Kjær
- Matheson Tri-Gas
- Packaging Corporation Of America
- FedEx Logistics
- Bunzl
What is the hourly salary range for Developer Full Stack jobs in Los Angeles,CA?
The hourly salary range is $20 - $28.63.
The hourly salary range is $20 - $28.63.
