Commute Time
Date Posted
Title
Job Type
Benefits
Pay
476 Dasm jobs in San Diego,CA
Apply Directly
Assembler - Hiring Now
Solar Turbines Incorporated
San Diego, CA 92101
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Willing to work any shift
- Any offer of employment is conditioned upon the successful completion of a drug screen
- High school diploma, GED, or equivalent
Apply Directly
Welder - Hiring Now
BAE Systems
San Diego, CA 92113
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Ability to accomplish welding processes aboard vessels and shops.
- Able to use hand tools and power tools safely and efficiently.
- High School Diploma or GED or equivalent experience.
- Requires a minimum of 3 years related experience in craft.
- Able to calculate and understand units of measure, including fractions and decimals.
- Able to read, write and comprehend simple instructions
- Able to apply common sense understanding to carry out instructions in written, oral or diagram form.
- Welding test will consist of full penetration butt weld test plates in three positions each; overhead (4G), vertical (3G) and horizontal position (2G).
- Able to work at heights, in confined spaces and have the ability to climb staircases and ladders of varying sizes and grades.
- Ability to work a variety of shifts as needed (1st shift 6:00 am to 2:30 pm, 2nd shift 3:00 pm to 11:00 pm)
- Obtain the following welding certifications (at a minimum): SMAW plate, SMAW Pipe, GTAW Pipe
- Full penetration welds 2G and 3G with ceramic backing, 4G with permanent backing.
- Ability to interpret and understand NAVSEA drawings/blueprints.
- Able to accurately use tape measure for measurements.
- Able to wear appropriate protective equipment, including respirator.
- Able to obtain DBIDS credential/Government clearance to enter US Navy Vessels.
- Able to physically perform essential job duties with or without accommodations.
- Able to understand, read and interpret welding symbols based on the requirements of Military Standard 22-D and have working experience with Military Standard 1689, DM 10-623B and CG-47 Crack Repair Manual.
- Able to carry personal tool bag weighing up to 50 lbs.
- Able to pass a hands-on welding practical test on SMAW, FCAW and GMAW-P (5XXX Aluminum) by way of x-ray NDT.
Apply Directly
Assembler - Hiring Now
L3 Harris
San Diego, CA 92101
$22.83-$42.54/hr
OnsiteBilingual PreferredEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Able to lift minimum of 35 lbs.
- Able to work under Microscope.
- Ability to read assembly drawings, BOM, wire list, engineering change orders, rework instructions, and process control instructions
- Ability to obtain a US Security Clearance
- Basic hand soldering of SMT, through-hole, and wiring.
- Security clearances may only be granted to U.S. citizens.
- Mechanical assembly using crimping tool, hot plate and torque drivers.
- Requires a High School Diploma or equivalent and a minimum of 6 years of prior relevant experience or 2 years post-Secondary/Associates Degree with a minimium of 2 years of prior related experience.
- Able to work on ladder, crane and scaffolding.
New, Posted 1 day ago
Apply Directly
Assembler - Hiring Now
General Atomics
Poway, CA 92064
~ 26 min Onsite
- Good understanding of the general aspects of the job with limited technical comprehension.
- Familiarity with use of soldering and compression connection tools.
- Good visual perception and ability to distinguish between colors.
- Typical requires a high school diploma or equivalent and three or more years experience.
- Must be customer focused and possess:
- Knowledge of computer operations and applications pertinent to the position.
- The ability to work independently or in a team environment is essential as is the ability to work extended hours as required.
- Proficient in the use of hand tools and torque wrenches; must have a solid understanding of prevailing torque and its proper application.
- The ability to read and interpret engineering drawing and wire lists.
Apply Directly
CNC Machinist Tooling- 2nd shift
Precision Metal Products
El Cajon, CA 92020
~ 20 min Onsite
- Bend, twist, or stoop to load parts into the machine.
- Computer skills to load programs; ability to edit computer programs.
- Advanced knowledge of all measuring devices including micrometers and calipers.
- Use hands to handle, control, or feel objects, tools, or controls.
- High School diploma or equivalent.
- Advanced knowledge of blueprints and die prints.
- Stand for periods of two to three hours at a time.
- Minimum of three (3) years in set-up and operation of manual and CNC machines.
- Ability to check tool and die dimensions.
- Must be able to lift 25 lbs comfortably.
- Repeat the same movements.
New, Posted 6 hours ago
Apply Directly
CNC Setup Machinist - 1st Shift
5th Axis
San Diego, CA 92111
$28-$45/hr
OnsitePaid Time OffRetirement Benefit
- AA Degree or High School diploma with job experience
- Team player and positive, cooperative attitude
- Minimum of 5 years' experience as a CNC Setup Machinist
- Strong ability to troubleshoot and optimize programs and tooling.
- Must be able to occasionally lift and/or carry up to 30 pounds.
- Must be able to push and/or pull up to 30 pounds.
- Ability to repeatedly kneel, bend, crouch, reach and/or stoop throughout the shift as needed to successfully perform job duties.
- Reliability and ability to listen and follow instruction
- Must be able to continuously stand and/or walk for extended periods of time on concrete surface.
- Solution oriented and ability to respectfully communicate with colleagues
- Detail-oriented with strong organizational skills and a sense of urgency.
- Proficiency with setup sheets and understanding of G&M; codes.
Apply Directly
Production Machinery Mechanic
VTG
San Diego, CA 92101
$32.08/hr
Onsite
- High School degree or equivalent required.
- The work of a Production Machinery Mechanic requires rounded training and experience usually acquired through a formal apprenticeship or equivalent training and experience. Included are workers whose duties involve setting up or adjusting machines.
- Individuals released from Military Service with other than "Honorable Discharges" do not meet minimum qualifications.
- May be required to drive company and/or government owned vehicles. Must pass a driving record background check to drive vehicles.
- All personnel must be U. S. citizens.
- Ability to read and interpret data is required.
- Minimum qualifications are the baseline for determining technical acceptability in the personnel.
- Experience must be within the last five years.
- Ability to read, write, speak and understand English.
Apply Directly
Welder Journeyman I - V
Propulsion Controls Engineering
San Diego, CA 92154
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Must be 18 years of age or older to apply.
- A minimum of five years marine and/or shipyard experience;
- Welder with advanced knowledge of FCAW, SMAW, GTAW, GMAW and BRAZE
- The ability to determine proper weld joint design without Supervision.
- This position may require access to U.S. government or military sites.
- Per federal requirements, acceptable ID must be REAL ID-compliant or an approved form of federal identification, such as a valid U.S. passport.
- Candidates must be eligible to obtain base access clearance, which includes passing a background check and presenting valid government-issued identification.
New, Posted 23 hours ago
Apply Directly
Assembler - Hiring Now
Ametek
San Diego, CA 92121
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must require a minimum of 3 - 5 years of related experience.
- Must be able to use hand tools (i.e. torque wrench, drills and inspection tools).
- Must be able to communicate effectively with others.
- Due to the nature of Programmable Power programs and products, applicants must have the legal right to work in the U.S. and additionally must be legally authorized to access export-controlled information and source code.
- This position requires the ability to lift 25 pounds.
- Must possess good to excellent assembly blueprint reading experience/skills.
- Basic computer skills.
- High school diploma or equivalent
- Ability to properly read a variety of measuring devices including rulers, tape measures, and scales.
Apply Directly
Ship/Submarine Quality Control 1 - San Diego, CA
M.C. Dean
San Diego, CA 92101
$55.50/hr
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Candidates must be able to physically access all areas on board U.S. Naval Vessels to include tanks, voids, and working aloft in support of production operations.
- Communicate information and ideas in speaking so others will understand.
- Apply general rules to specific problems to produce answers that make sense.
- Must have the ability to read and interpret blueprints, sketches, written technical instructions and manuals to develop Test and Inspection QA Workbooks, incorporating V, I, and G level inspection points to Test and Inspection Plans (TIP).
- Listen to and understand information and ideas presented through spoken words and sentences.
- Identify and understand the speech of another person.
- Have finger dexterity in order to manipulate objects with fingers rather than whole hands or arms, for example, using a keyboard.
- Active OSHA 7615 Maritime Training 10hr Card
- Sitting for extended periods of time.
- Certified Quality Inspector Certification
- NAVSEA Fiber Optic QA/Supervisor Training
- High school diploma / GED with 6-8 years of experience
- Bachelor's degree with 0-2 years of experience
- NAVSEA Cableway Certification
- Shipyard Competent Person
- Exposure to computer screens for an extended period of time.
- NAVSEA Connector Certification
- Quality Control shall have a strong knowledge of all inspection procedures and utilization of required measuring devices that correspond to the tasking in which they are assigned.
- Read and understand information and ideas presented in writing.
- Reach by extending hands or arms in any direction.
- Candidate must possess C5ISR Installation, Quality Assurance, or Quality Control experience.
What companies are hiring Dasm jobs in San Diego,CA?
- Solar Turbines Incorporated
- BAE Systems
- L3 Harris
- General Atomics
- Precision Metal Products
- 5th Axis
- VTG
- Propulsion Controls Engineering
- Ametek
- M.C. Dean
- Solar Turbines Incorporated
- BAE Systems
- L3 Harris
- General Atomics
- Precision Metal Products
- 5th Axis
- VTG
- Propulsion Controls Engineering
- Ametek
- M.C. Dean
What is the hourly salary range for Dasm jobs in San Diego,CA?
The hourly salary range is $22.83 - $55.5.
The hourly salary range is $22.83 - $55.5.
