Commute Time
Date Posted
Title
Job Type
Benefits
Pay
74 Computer Technician jobs in Moreno Valley,CA
New, Posted 5 hours ago
Apply Directly
Assembler - Hiring Now
Collins Aerospace
Riverside, CA 92506
$22.28-$49.49/hr
~ 21 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Typically, a HS Diploma or GED is required.
- This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here.
Apply Directly
Assembler - Hiring Now
General Micro Systems
Rancho Cucamonga, CA 91739
~ 42 min OnsiteEducation AssistanceHealth InsurancePaid Time Off
- In compliance with federal law, all persons hired will be required to verify identity and eligibility to work in the United States and to complete the required employment eligibility verification form upon hire.
- Post-offer applicants must pass a drug screen test.
- Limited travel required
- If required, you must pass a background check and/or have the ability to obtain and maintain security clearance.
- Must be a US Citizen, Permanent US Resident, or currently authorized to work in the US on a full-time basis without current or future employment sponsorship.
- Minimum High School diploma or general education degree (GED)
- Experienced and familiar with electro-mechanical assembly processes and associated tools/instruments
- Must have experience reading assembly drawings/diagrams and completing work to specifications
- Must be able to work on site the standard 8 AM-5 PM, Monday - Friday schedule and overtime as required
- Minimum of 6 months hands-on assembly experience
- Must report to work at the scheduled time and maintain satisfactory attendance with limited unscheduled absences
- Lift up to 30 lbs.
Apply Directly
3D Print Technician
Keysight Technologies
Moreno Valley, CA
Onsite
- Candidates who wish to be considered must be currently enrolled in an accredited college/university as of September 2026.
- Applicants who have graduated before September 2026 will not be considered unless they are starting a MS or PHD program after graduating.
- Mechanical aptitude and strong attention to detail
- High school diploma or equivalent
- Experience with Corel Draw design software.
- Experience with 3D printing technologies and materials
- Visa Sponsorship is not available for this position.
- 3D Print Technician
- Manual dexterity for handling small parts and tools
- Ability to lift up to 40 lbs.
- Familiarity with slicing software (e.g. Bambu Labs)
- Ability to troubleshoot technical issues
- Essentials: Experience with Bambu H2D, H2C and H2S printers.
New, Posted 6 hours ago
Apply Directly
Quality Technician
Stremicks Heritage Foods
Riverside, CA 92505
$27.50-$33.14/hr
~ 21 min OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Quality Technician
- Must be able to commute to Riverside, CA 92505
- Weekends as needed
- HACCP guidelines
- FDA regulations
- In person work location
- Coordinate measuring machines (CMM)
- Holidays
- Overtime
- Micrometers
- Night and/or swing shift
- Pay: $27.50 - $33.14 per hour
- Manufacturing: 1 year (Preferred)
New, Posted 5 hours ago
Apply Directly
Assembler - Hiring Now
RTX
Riverside, CA 92506
$22.28-$49.49/hr
~ 21 min OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Typically, a HS Diploma or GED is required.
- This job requires a U.S. Person. A U.S. Person is a lawful permanent resident as defined in 8 U.S.C. 1101(a)(20) or who is a protected individual as defined by 8 U.S.C. 1324b(a)(3). U.S. citizens, U.S. nationals, U.S. permanent residents, or individuals granted refugee or asylee status in the U.S. are considered U.S. persons. For a complete definition of "U.S. Person" go here.
New, Posted 12 hours ago
Apply Directly
Assembler - Hiring Now
Coherent
Murrieta, CA 92563
~ 41 min Onsite
- Ability to read and interpret documents such as safety rules, operating and maintenance instructions, and procedure manuals.
- Must be able to wear safety gear for extended periods of time
- Ability to anticipate problems and proactively identify potential problems.
- Close vision, distance vision, depth perception, and ability to adjust focus
- Stand, walk, stoop, kneel, crouch, or crawl
- Up to 50 pounds occasionally, with or without assistance
- High School Diploma or (GED)
- Ability to deal with problems involving a few concrete variables in standardized situations.
- Ability to inspect parts using an eye loupe and read small graduations on a micrometer and depth gauge
- To conform to U.S. Government export regulations (ITAR), applicant must be a U.S. person, lawful permanent resident of the U.S., protected individual as defined by 8. U.S.C. 1324b(a)(3), or eligible to obtain the required authorizations from the U.S. Department of State.
- Sit, use hands and fingers, and reach with hands and arms
- Work Experience - Minimum of 2 years of experience in similar assembly operation.
- Talk and hear
- Ability to use a scientific calculator and perform basic calculations.
- Ability to apply common sense understanding to carry out detailed but uninvolved written or oral instructions.
- Ability to communicate in English and speak effectively before small groups of employees in the organization.
- Ability to calculate figures and perform simple addition, subtraction, multiplication and division of whole numbers, decimals and fractions.
- Depending on location, this position may be responsible for the execution and maintenance of the ISO 9000, 9001, 14001 and/or other applicable standards that may apply to the relevant roles and responsibilities within the Quality Management System and Environmental Management System.
- All employees are required to attend scheduled training, follow the site EHS procedures and Corporate EHS standards. This includes the use of proper protective equipment (PPE) as required by the job responsibilities.
- High level of manual dexterity, knowledge of a wide variety of hand tools, and knowledge of soldering.
- Demonstrate a high level of manual dexterity and care when handling delicate parts
- Managers will ensure that all safety and environmental procedures are followed consistently. They will ensure that risk assessments are performed, proper training, work instructions, required PPE is available, and will monitor compliance.
- Up to 10 pounds frequently
Apply Directly
Paid on the Job Training - Auto Glass Technician Trainee
Safelite
Redlands, CA 92373
$18.25/hr
~ 25 min Onsite
- Ability to communicate orally (via phone) and written (via computer or other electronic means)
- Ability to operate a motor vehicle in accordance with all federal, state and local laws and agreement to be monitored via camera / video surveillance
- Valid state-issued driver's license and any other licenses (as required by federal, state and local laws) to operate a company vehicle. Required
- Lifting and carrying up to 25 lbs. for short periods, assist an associate with lifting windshields weighing 26 lbs. to 50 lbs.
- Must be 18 years of age or older.
- Ability to stand for extended periods, work in tight spaces, bend and twist body
- On-the-job training/completion of Safelite SafeTech™ certification. Required
- Ability to work with chemicals (including but not limited to flammable chemicals), as applicable per the “Safelite Way of Fitting”
- Ability to maintain a professional appearance, adhering to Company uniform and PPE policies
- Ability to use a variety of hand tools and power tools safely and effectively
- Ability to read, write and interpret the English language and technical directions
- Ability to safely work outside (in a variety of weather conditions and extreme temperatures) for extended periods
New, Posted 3 hours ago
Apply Directly
Assembler - Hiring Now
Vishay Intertechnology
Ontario, CA 91764
$18-$20/hr
~ 36 min Onsite
- This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as "U.S. Persons" as defined by 22 C.F.R. §120.15 is required. "U.S. Person" includes U.S. Citizen, lawful permanent resident, refugee, or asylee.
- Be able to perform the basic process operations in the manufacturing of potentiometers in the assigned work centers while meeting labor standards
- Demonstrate knowledge, aptitude and manual coordination
- Ability to read, interpret and follow engineering drawings and specifications
- Utilize inspection gauges, tools and electronic test equipment
- High School diploma or equivalent
- Be able to work under a microscope
New, Posted 16 hours ago
Apply Directly
No Experience Needed | Caregiver
CareInHomes
Homeland, CA 92548
~ 26 min OnsiteHealth InsurancePaid Time Off
- Be dependable
- Be of legal age
- Be eligible to work in the US
- Have an active driver's license and car
Apply Directly
Operational Support - Laborer
Packaging Corporation Of America
San Bernardino, CA 92404
~ 25 min Onsite
- May be required to stack parts up to 30 lbs. for a period of up to 12 hours
- Must be willing to work closely on a day-to-day basis with other production personnel
- Must be able to maintain shop and shop equipment per 5S Standards
- Must be able to pass company safety rules and lock-out tag-out procedures
- Must be able to work overtime and weekends as needed
- High School Graduate or GED
What companies are hiring Computer Technician jobs in Moreno Valley,CA?
- Collins Aerospace
- General Micro Systems
- Keysight Technologies
- Stremicks Heritage Foods
- RTX
- Coherent
- Safelite
- Vishay Intertechnology
- CareInHomes
- Packaging Corporation Of America
- Collins Aerospace
- General Micro Systems
- Keysight Technologies
- Stremicks Heritage Foods
- RTX
- Coherent
- Safelite
- Vishay Intertechnology
- CareInHomes
- Packaging Corporation Of America
What is the hourly salary range for Computer Technician jobs in Moreno Valley,CA?
The hourly salary range is $18 - $49.49.
The hourly salary range is $18 - $49.49.
