Commute Time
Date Posted
Title
Job Type
Benefits
Pay
302 C4 Technical Services jobs in South Dakota
Apply Directly
Production Technician 1
Vishay Intertechnology
Yankton, SD 57078
Onsite
- This position requires access to information subject to the International Traffic in Arms Regulations and/or the Export Administration Regulations. As such, this position is open only to applicants who qualify as "U.S. Persons" according to U.S. federal law.
Apply Directly
Sr. Lead Service Technician - Rapid City
Trane Technologies
Black Hawk, SD 57718
$25/hr
OnsiteEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Must possess a valid driver's license for a minimum of 12 months, with no major or frequent traffic violations including, but not limited to: DUI, Hit & Run, License Suspension, Reckless / Careless Driving or multiple smaller infractions or preventable collisions in the previous 3 years
- Must be able to reach your hands over your head
- This role may be exposed to variable weather conditions, moving mechanical parts, heights, risk of electrical shock, noisy operating equipment and other variable environmental conditions based on location
- Must be able to comfortably and routinely access rooftops with extension and/or fixed ladders at heights of 15' to 20', and occasionally, up to 50 feet +
- This position is highly physical and requires regular use of hands, fingers, walking, stooping, kneeling and climbing ladders. It requires employees to regularly lift and or move up to 10 lbs., frequently lift and/or move up to 40 lbs. and occasionally lift and/or move more than 40 lbs
- Operating knowledge of Microsoft office software and working proficiency with hand held computer (i.e. Smartphone, iPad)
- Must be able to twist the trunk of your body 90 degrees in each direction
- Must be able to squat and touch the floor with both hands
- Base Pay Range: $25/Hr - $46Hr
- Must be able to maneuver confined access areas, as small as 30” vertical x 45” horizontal
- Typically requires at least 10 plus years of experience in HVAC
- A High School Diploma or equivalent, or certificate of completion from an accredited technical school is required
- This role has been designated by the Company as Safety Sensitive
- Must be able to wear helmets, safety goggles, fall protection harness and safety boots to safely perform job duties
- Must be able to stand on concrete surfaces for extended periods, routinely up to 4 hours
- Must be able to safely and legally operate a vehicle using a seat belt
- Must be able to safely use a ladder with a 375 lb. total weight limit, while carrying equipment of 50 lbs. or less
New, Posted 1 day ago
Easy Apply
Reliability Specialist / Engineer
Agropur
Lake Norden, SD 57248
OnsiteHealth InsurancePaid Time OffRetirement Benefit
- Bachelor's Degree in Engineering or related field required.
- Technical and practical knowledge of manufacturing production equipment.
- Equivalent combination of education and/or experience may be considered.
- Knowledge of Computerized Maintenance Management System (CMMS) software.
- Minimum of three (3) years of experience in reliability, preferably in the food industry, required.
- Knowledge of best practices in maintenance reliability required.
- Knowledge of change management concepts required.
Apply Directly
Sr. Manufacturing Engineer Manager
Terex Corporation
Watertown, SD 57201
$125,000-$150,000/yr
Paid Relocation to Watertown, SD
OnsiteBilingual PreferredHealth InsurancePaid Time OffRetirement Benefit
- Bachelor's degree in Manufacturing, Mechanical, Industrial, or related Engineering field.
- Strong project management skills including budgeting, scheduling, and risk management.
- Proficiency with CAD/CAM and 3D modeling tools (SolidWorks, AutoCAD, Creo OnShape).
- Strong background in welding, assembly fixtures, metal fabrication, Tooling, and coating systems.
- Demonstrated success in Lean Manufacturing, 5S, and Kaizen environments.
- 7-10 years of progressive manufacturing engineering experience in heavy equipment or industrial manufacturing.
- Advanced analytical and communication skills with ability to influence across all levels of the organization.
- 5+ years of leadership experience managing technical teams.
Apply Directly
Assembler - Hiring Now
Graco
Sioux Falls, SD 57104
OnsiteEducation AssistanceHealth InsuranceRetirement Benefit
- Reasonable accommodations considered for physical requirements of position.
- Reaching, grasping, gripping and fine manipulation with hands is required.
- Previous manufacturing and/or assembly experience.
- Applicants must be legally authorized to work in the United States.
- Computer operation skills at an intermediate level.
- This role is not eligible for immigration sponsorship now or in the future (e.g., H-1B, TN, F-1 OPT).
- Must have a good understanding of blue prints, and ability to read and follow operation layout instructions.
- Frequent, repetitive elbow movements.
- Ability to stand/walk/sit, for up to eight hours.
- Successful completion of established applicant tests.
- High school degree or equivalent.
- Ability to set up and perform operations where quality, tolerances, and operation sequence are of critical importance.
- Required to occasionally stoop, bend, lift and load up to 40 pounds.
Easy Apply
Part Time Sales Representative – Work from Home Remotely
Vector Marketing
Pierre, SD 57501
RemoteFlexible Schedule
- Able to start within the next 7 - 10 days
- Enjoy working with people
- All ages eighteen plus or seventeen and a high school graduate
- Willing to learn and apply new skills
Apply Directly
Manufacturing Engineer - Operational Excellence
ASTEC INDUSTRIES
Yankton, SD 57078
Onsite
- Knowledge of engineering/manufacturing system of symbols, legends, shading and lines required and skill reading engineering drawings required.
- Specific vision abilities required by this job include close vision, depth perception, and ability to adjust focus.
- Deal with several abstract and concrete variables
- Knowledge of machine shop operations/processes required.
- The employee must occasionally move more than 49 pounds.
- Must be able to meet regular attendance requirements.
- While performing the duties of this job, the employee is regularly exposed to risk of injury in a shop and warehouse environment and asphalt plant environment.
- The employee is occasionally exposed to toxic or caustic chemicals, extreme cold, and extreme heat.
- Knowledge of all types of metal-forming processes to include laser cutting, machining, welding, flame cutting, and bending.
- While performing the duties of this job, the employee is regularly required to use hands to finger, handle, or feel; reach with hands and arms; climb or balance; stoop and kneel, or crawl; and talk and hear.
- The noise level in the shop and asphalt plant environment is occasionally very loud.
- The employee frequently is required to stand, walk, and sit.
- Bachelor's degree in industrial, manufacturing, mechanical engineering or related field required.
- Have strong analytical and troubleshooting skills
- The employee is frequently exposed to moving mechanical parts and outside weather conditions.
- Must be able to collaborate and facilitate cross functional teams to influence and manage change in a heavy manufacturing, multi-shift work environment
- Must have the ability to define problems, collect and analyze data, establish facts and draw valid conclusions
- Ability to interpret an extensive variety of technical instructions in mathematical or diagram form
- Knowledge of LEAN methods used in manufacturing processes required.
- The physical demands described here are representative of those that must be met by an employee to successfully perform the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- Minimum of three (3) years related work experience in a manufacturing environment required with a demonstrated understanding of heavy machinery manufacturing processes.
- The work environment characteristics described here are representative of those an employee encounters while performing the essential functions of this job. Reasonable accommodations may be made to enable individuals with disabilities to perform the essential functions.
- In depth knowledge of Excel and/or PowerBI to create various pareto analyses.
Apply Directly
Electronic Assembler
Banner Engineering
Aberdeen, SD 57401
OnsiteFlexible ScheduleEducation AssistanceHealth InsurancePaid Time OffRetirement Benefit
- Knowledge of basic math/calculation's
- Attention to detail and quality.
- Sit for up to 8 hours per day
- Utilize a computer mouse, keyboard, computer, and other standard office equipment
- High school diploma or GED
- Ability to use a computer, hand tools, gauges and testers.
- Must be able to read and understand English.
- Ability to work independently and in a group setting.
- Frequently required to talk and/or hear
- Occasionally move, carry, or lift objects or materials weighing up to 30 pounds.
- Bends neck to use scope for precision work and perform inspections.
- Simple hand grasp needed to convey parts and hold tools; dexterity required to solder, encapsulate, correct defects, etc.
- Ability to focus on fine details and distinguish between colors as required for detailed tasks
- Hand solder with hot soldering iron, inspect boards under a microscope, make simple repairs, etc.
- Exposed to a computer screen for up to 8 hours per day
- Regularly required to use hands to finger, handle or feel to complete tasks.
- To perform this job successfully, you must be able to perform each essential duty satisfactorily, and regular attendance is required.
- Required to talk or hear frequently
Apply Directly
Manufacturing Engineer
Wabtec
Yankton, SD 57078
Paid Relocation to Yankton, SD
Onsite
- Any offer of employment is conditioned upon the successful completion of a drug screen (as applicable) and fitness for duty test (as applicable).
- Travel domestically and internationally as required; occasional weekend work may be necessary.
- Ability to pass a pre-employment physical, drug, and background test.
- Wabtec will only employ those who are legally authorized to work in the U.S. for this opening.
- Bachelor's degree in engineering or related technical experience.
- Must have the skills to prepare a wide variety of engineering and maintenance reports and documentation.
- Understand and interpret policy, procedures, and technical documentation.
- Shop Floor Presence Required
- PPE Required: Safety glasses, steel-toed shoes, hearing protection and gloves.
- Ability to communicate, in English, effectively and clearly by both written and verbal means.
- Strong understanding of mechanical, electrical, and pneumatic systems.
New, Posted 3 hours ago
Apply Directly
Environmental Services - Manager in Training
Healthcare Services Group
Sioux Falls, SD 57101
OnsiteHealth InsurancePaid Time Off
- Must be able to be at work as scheduled and on time.
- A high school diploma or equivalent required.
- Must be able to work around food and cleaning products.
- Must be able to lift/carry a maximum of 50 pounds, push/pull a maximum of 50 pounds, stand, sit, bend and walk for extended periods.
- Must live in the service area.
- Basic computer skills with the ability to maintain records and complete reports as required, including web-based reporting.
- Must be able to perform routine, repetitive tasks continuously.
- Compliance with COVID-19 Vaccination Policies, as required by State, Local, and/or Customers.
What companies are hiring C4 Technical Services jobs in South Dakota?
- Vishay Intertechnology
- Trane Technologies
- Agropur
- Terex Corporation
- Graco
- Vector Marketing
- ASTEC INDUSTRIES
- Banner Engineering
- Wabtec
- Healthcare Services Group
- Vishay Intertechnology
- Trane Technologies
- Agropur
- Terex Corporation
- Graco
- Vector Marketing
- ASTEC INDUSTRIES
- Banner Engineering
- Wabtec
- Healthcare Services Group
What is the hourly salary range for C4 Technical Services jobs in South Dakota?
The hourly salary range is $25 - $25.
The hourly salary range is $25 - $25.
